Ryuji Yamada (Scientist)
Service Work:
  Magnet Stuff
    4 hrs per week
    Description: "In 2004, I spent roughly 100 hours for solving the 
       problems related to the D0 solenoid when there was noise problems 
       during last summer and the quenching problem during last start-up.
       And another 50 hours for the Gaussmeter and NMR monitors ...
       I will take the GM shifts as necessary, preferably lumped  in the 
       later half of the year, in order to regain now my speed in the 
       D0 data analysis."

     

Physics Work
   
  Top Group
    7 hrs per week
    Description: " For the analysis of data, I spent about 200 hours for 
       catching up with the new D0 data system, and reading new data reports.
       I also spent about 100 hours for attending D0 meetings.

       This year, I intend to analyze seriously the all-jet channel data of 
       the top, especially its top mass, and something beyond, using the much 
       more  accumulated D0 data.  I intend to make the NMR much more reliable 
       for routine monitoring, which is now suffering from noises."

Other
  Technical Division
    All the rest
    Description: "I was very busy for the present work at Technical 
       Division, because we had a big problem in our magnet.  Now the 
       problem is partially solved."


Updated: January 19, 2005