OFFICIAL D0 RUN II DATA-SETS

 

The D0 reconstruction farms do production runs over ranges of data with defined code versions. This documents the official production runs for runII.

Anyone doing physics analysis should understand the differences between the different data samples, they can and do overlap!

 
Code Versions input types output types run-range % success status /statistics
p10.07.01 raw data reco, root-tuple 129194-133030 ~70% done Nov 01
p10.11.00 raw data reco, root, filtered-reco,filtered-root 139500-145043 ~100% done Feb 02
p10.13.00-a filtered-root files filtered-reco, filtered-root 139500-145043 ~70% done Feb 02
p10.14-Moriond raw data and filtered root reco,root, filtered-reco,filtered-root 139500-145043 100% done Feb 25
p10.14b raw data reco, root, filtered-reco, filtered-root 1 145044-    
p10.15 raw data   145044-156700   done Jun 02 
p11.09
p11.10
p11.11
p11.12
 raw data and filtered-root reco,root, filtered-reco, filtered-root, thumbnail,filtered-thumbnail 157000- in progress

P11.09 and up series

p11.09 is run on raw data after Jun 3, 2002

special stream eliminated after p11.11

Algorithms info

 

p10.15

Run p10.15 on raw data taken Feb2-Jun3, 2002

Algorithms info

 
Known problems:
p10.15.00 did not have root files for special stream
p10.15.01 was ok, but could not process some data to a vtx statistics bug which did not affect output but did crash code
p10.15.02 is missing muon hits due to a compiler bug in Linux 7.1 maxopt
p10.15.02-dbg is the same run without optimization
Some files were run through both p10.15.00 and p10.15.01, if you find some, please report and they will be deleted.

 

p10.14

P10.14 has two input sources, the raw data and the filtered files from p10.11.00. Because of this, the filtered events from p10.11.00 occur twice in the p10.14.00 output and need to be distinguished by sam dimensions. Datasets have been defined which pick up the correct data.

Click here for details

Some data after Feb 1 were processed with p10.14, they are not part of an official sample, see p10.15 for that.

The sam project definitions for the Moriond sample are under keyword p10-14-official

reco_139500-145043_p10.14 is the reco files with no filtering

root_139500-145043_p10.14 is the root files with no filtering

filtered-reco_139500-145043_p10.14 is the filtered reco output files using p10.14 filtering

filtered-root_139500-145043_p10.14 is the filtered root output files using p10.14. filtering on the reco followed by reco_analyze

reprocessed_p10.11_filtered-reco_139500-145043_p10.14 are the filtered reco files from p10.11 run through p1014 reco

reprocessed_p10.11_filtered-root_139500-145043_p10.14 are the filtered reco files from p10.11 run through p1014 reco and recoanalyze

 

To eliminate known bad runs, you need to use

--dim="__SET__ <set from above> minus (run_number 139615,140452,141185,142109,143729-144186 )"

 

None of these samples should be mixed in any analysis as the filtered and reprocessed are overlapping subsets of the full sample.

p10.13

P10.13 has one input sources, the filtered files from p10.11.00.

The sam project definitions are under keyword p10-13-official

Click here for details

 

reprocessed_p10.11_filtered-reco_139500-145043_p10.13 are the filtered reco files from p10.11 run through p1013 reco

reprocessed_p10.11_filtered-root_139500-145043_p10.13 are the filtered reco files from p10.11 run through p1013 reco and recoanalyze

 

p10.11

P10.11has one input source, the raw data .

Click here for details

The sam project definitions are under keyword p10-11-official

reco_139500-145043_p10.11 is the reco files with no filtering

root_139500-145043_p10.11 is the root files with no filtering

filtered-reco_139500-145043_p10.11 is the filtered reco output files using p10.11 filtering

 

None of these samples should be mixed in any analysis as the filtered and reprocessed are overlapping subsets of the full sample.

p10.07

P10.07 has one input source, the raw data .

Click here for details

The sam project definitions are under keyword p10-07-official

reco_129194-133030_p10.07is the reco files with no filtering

root_129194-133030_p10.07 is the root files with no filtering

Please contact d0-farms@fnal.gov with comments/questions

or visit our website at http://www-d0.fnal.gov/computing/production