Production Release p11

Status: It is based on t01.73.00. It is now considered frozen. There are a couple updated packages that did not make it into the final compile. If you want to use these packages, please check out the listed tag and recompile in your own area:
```
l3ftrack_mc   p11-br-15 replace calls to private variables with access function
l3tCalUnpTool p11-br-11 zero sigma and config bug fixes
```
l1cal Farm Fix (09/16/2002)
- Code fix Josh Kalk has written a piece of code to fix the p11 problems that have been occuring with the l1cal farm processed data.
  Please download fix_l1cal.C to correct this problem.

P11.13.00 (09/27/2002; updated 10/15/2002)

Status Corrections to stop some crashing that is occurring online.

Package changes in p11.13.00

tsim_l1l2     p11-br-04   turn on l2muon output in d0_analyze on data
l2monitor     p11-br-20   minor update to L2 online: make sure the error 
                           summary shows up in monitoring
l2slic        p11-br-40   fix online crashing; fix bug in BC-fwd algorithms;
                          add protection for on-line errors;
                          work on error bits and on-line debugging;
                          eliminate gcc warnings
l2slic_tables p11-br-17   new LUT tables for fwd mu detector (survey geometry)
-----------------------
l3fanalyze    p11-br-20
l3tCalUnpTool p11-br-10   2.5sigma zero suppression threshold implemented

P11.12.01 (09/12/2002)

Status

Package changes in P11.12.01

build 01
--------
trigsim_analyze p11-12-00a

P11.11.00 (08/12/2002)

Status

Package changes in P11.11.00

build 01
--------
l2gblworker   p11-11-00a fix number of commissioning tools
l2mu_analyze  p11-11-00a (aka p11-br-17) component tests
l2mu_util     p11-11-00a (aka p11-br-18) minor improvements
l2mucworker   p11-11-00a (aka p11-br-18) minor improvements
l2mufworker   p11-11-00a (aka p11-br-18) minor improvements
l2slic        p11-11-00a (aka p11-br-38) fix phi=0 bug, monitoring
l2slic_tables p11-11-00a (aka p11-br-16) gcc fixes and added debugging tools
tsim_l1l2     p11-11-00a fix cal rcp defaults
--------------------------
l3fanalyze    p11-br-19

P11.10.01 (08/01/2002)

Status Small rebuild to fix L2 triggerbits 63 and 127
Package changes in P11.10.01 (build 1 only)
```
l2utils  p11-br-02
```

P11.10.00 (06/14/2002)

Status

Package changes in P11.10.00 (build 1 only)

l2message      p11-br-11 online fixes
l2workerbase   p11-br-14 "
l2monitor      p11-br-19 "
l2gblworker    p11-br-24 "
l2slic         p11-br-36 "
l2mucworker    p11-br-17 "
l2mufworker    p11-br-17 "
l2mu_util      p11-br-17 "
l2io           p11-br-16 "
tsim_l2slic    p11-br-22 "
tsim_l1l2      p11-br-22 change symlinks to copies
tsim_l1ft      p11-br-14 change symlinks to copies
-----------------------------

P11.09.00 (06/14/2002)

Status L1/L2 seem to run fine alone. When combined with L3 (which runs fine alone) the L1Cal outputs are corrupt. This is a very nasty bug which we are completely stumped about how to solve.....

Package changes in p11.09.00 (build 3)

 
d0trigsim     p11-09-00a   - add rdc_run_config_mgr to OBJECTS
l2gblgeneric  p11-br-15    - eta/phi sep filter
l2gblworker   p11-br-23
l2mu_analyze  p11-br-16    - remove L1Muon warnings
l2mu_util     p11-br-16    |
l2mucworker   p11-br-16    | handling event mis-alignment errors online
l2mufworker   p11-br-16    |
l2slic        p11-br-33    |
l2slic_tables p11-br-15
tsim_l2slic   p11-br-21

Package changes in p11.09.00 (build 1 only)

l2mucworker     p11-09-00a |
l2mufworker     p11-09-00a |
l2mu_util       p11-09-00a | error logger stuff
tsim_l2slic     p11-09-00a |
l2slic          p11-09-00a |

l2monitor       p11-09-00a | add timing of algos offline
l2moniogen      p11-09-00a |
l2libdeps       p11-09-00a - add timing dependence
l2gblworker
l2gblgeneric    p11-09-00a - fix for eta and phi separation
tsim_l1l2       p11-09-00a - global and cal fixes
l1cal_analyze   p11-09-00a |
tsim_l1cal      p11-09-00a | fixes for new hardware configuration

l2io            p11-09-00a |
tsim_l1frm      p11-09-00a |  fix L1->L2 communication
----------------------------
ScriptRunner    p11-br-16
l3fCalCalibTool p11-br-03
l3fTauTools     p11-br-03
l3fanalyze      p11-br-17
l3fchunk        p11-br-02

P11.08.00 (05/30/2002)

Status Runs out-of-the-box. Some problems with recent online trigger lists. L2: Coor and the l2parser disagree on spacing. L3: geometry management crash.

Package changes in p11.08.00 (build 1 only)

d0trigsim      p11-08-00a  - add *_data rcps that work
l1l2collector  p11-08-00a  - fix crashing bug
l1l2unpacker   p11-08-00a  - remove obselete l1ft stuff
tsim_l1ft      p11-08-00a  - remove obselete l1ft stuff
l1ft_analyze   p11-08-00a  - remove obselete l1ft stuff
tsim_l2slic    p11-08-00a  - gcc fixes
l2mu_util      p11-08-00a  |
l2mucworker    p11-08-00a  | error-handling
l2mufworker    p11-08-00a  |
l2slic         p11-08-00a  |
l2slic_tables  p11-08-00a  |
tsim_l1l2      p11-08-00a  - change l1cal defaults (not <0.8 eta,etc.)
l2caljetworker p11-08-00a
-------------------------
l3fanalyze     p11-br-13
l3exceptions   p11-br-03

P11.07.00 (05/07/2002)

Status Crashes in l1l2collector if run "out-of-the-box". Fix exists (will go into p11.08.00)
```
addpkg l1l2collector p11-br-11
addpkg d0trigsim
gmake all
```
remember to add the -localbuild option to your commandline when running. With this fix (and default triggerlist) things seem to be running smoothly.

Package changes in p11.07.00 (build 1 only)

tsim_l1cal      p11-07-00a  reorder fibres in eta
l2moniogen      p11-07-00a
l2gblgeneric    p11-07-00a
l1l2unpacker    p11-07-00a 
tsim_l1frm      p11-07-00a
l2calbase       p11-07-00a         
l2calemworker   p11-07-00b  reorder fibres in eta
l2caljetworker  p11-07-00b
tsim_l1l2       p11-07-00a 
l1frm_analyze   p11-07-00a
l2gblbase       p11-br-12
l2gblworker     p11-br-19   fix bug in online running - too many objects
l1l2trigbits    p11-07-00a  first release, needed by event_info
l1cal_analyze   p11-07-00a
-------------------------
l3monitor_utils p11-br-03
l3fstatmanager  p11-br-01 
l3tCalUnpTool   p11-br-04 
l3fMuonTools    p11-br-06

P11.06.00 (04/23/2002)

Status Looks good. Some problems with some triggerlists....still working on it....

Package changes in p11.06.00 (build 1 only)

l1cal_analyze   p11-06-00a  - fix passthrough
tsim_l1ft       p11-06-00a  - fix parsing of epics.sim
l2slic          p11-06-00a  - disabling of inputs
tsim_l2slic     p11-06-00a    
tsim_l1l2       p11-06-00a  - new rcps for data
tsim_l1cal      p11-06-00a  - gains, pedestals, etc
--------------------------
l3monitor_utils p11-br-02 
l3node          p11-br-07 
l3filters       p11-br-04
l3fmuo_local    p11-br-04 
l3ftrack_global p11-br-00
l3fcft_vertex   p11-br-03 
l3femtools      p11-br-03 
l3fTauTools     p11-br-02
l3fanalyze      p11-br-09 
l3ftrack_base   p11-br-00
ScriptRunner    p11-br-10 
l3fsmtunptool   p11-br-01
l3fcalib_smt    p11-br-01

P11.05.00 (04/09/2002)

Status Major improvement to d0trigsim stability. Actually runs out-of-the-box!!! Troubles seen with some input files and trigger lists other than default. L1Frm still producing all zero trigger bits. L1Cal data passthrough mode doesn't work quite the way it should.....

Package changes in p11.05.00 (build 1 only)

tsim_l1l2        p11-br-17    - move l1ft_analyze, rcp changes
l2io             p11-05-00b   - speed increases, fix test, l1ft objects
l2workerbase     p11-05-00a   - speed increases
l1l2unpacker     p11-br-12    - l1ft unpacking
l2monitor        p11-br-16
l2caljetworker   p11-br-13
l2calemworker    p11-br-13
l2caljet_analyze p11-br-12
l1ft_analyze     p11-br-11    - move out of dataflow, use new unpacker
tsim_l1muo       p11-br-12    - fix output to L2
l2gblmuon        p11-br-17    - redefine muon quality
l2mu_analyze     p11-br-15
l2mucworker      p11-br-13
l2mufworker      p11-br-13
l2slic           p11-br-17
tsim_l2slic      p11-br-17

P11.04.00 (03/26/2002)

Status Works ok on default trigger list except for l1frm_analyze on IRIX which causes floating point exception. Suggestions:

1) run on linux. Floating point exceptions don't cause crashes on
	linux
builds of D0 code. I have run on your files on clued0 without trouble.

2) remove l1frm_analyze package from the list of packages run by
d0trigsim:

  addpkg tsim_l1l2
  edit tsim_l1l2/rcp/l1l2analyze.rcp, remove l1frm_analyze from the
  "packages" list:
     string Packages = "l1muo_analyze l1cal_analyze l2calem_analyze
     l2caljet_analyze l2calmet_analyze l2cps_analyze l2mu_analyze
     l2gbl_analyze"

 Then add -localrcp to your trigsim commandline. This works on d0mino

Many tweaks to L2 algorithms in response to running online...muon, cal and global changes. L3 changes should be restricted mainly to DAQ changes (no major algorithm changes).

Package changes in p11.04.00 build 1

tsim_l1l2       p11-br-13    - event_info by default, no dump
l2calworker     p11-br-01    - first release of combined cal worker
                               (needed for unpacking)
l1l2unpacker    p11-br-11    - new l1muonunpacker, l1cftunpacker
                               add combined L2cal unpacking
l2calem_analyze  p11-br-11    - combined or tsim unpacking
l2caljet_analyze p11-br-11    - combined or tsim unpacking
l2gblmuon        p11-br-15    - fix bug in accessing iogen object
l2gblem          p11-br-11    -
l2gbljet         p11-br-11     |
l2gbltrack       p11-br-11     | remove "if debug" statements
l2gblworker      p11-br-11     |
l2gblgeneric     p11-br-11    -
l2cpsworker      p11-br-11    - change unpacking to not use width
tsim_l2slic      p11-br-12    - set bunch and crossing, errorlogger mods
l2slic           p11-br-14    - remove unused variable
l2slic_tables    p11-br-12
l2mu_analyze     p11-br-13    - re-enabled checks for event-alignment
l2calemworker    p11-br-11    - fix bug 
l2caljetworker   p11-br-11    - Proper Pedestal handling when calculating total energy
l2monitor        p11-br-11    - more object ID functions for circular buffers
l2base           p11-br-11    - new debug macro scheme
l2parser         p11-br-11    - new debug macro scheme
---------------------
l3fmuo_unpack    p11-br-02    - new muon unpacking
l3fMuonTools     p11-br-04    -
l3fmuo_centralmatch p11-br-01  |
l3fcps           p11-br-03     |
l3fmuo_local     p11-br-03     | fix to test, rm *.root
l3fcpsunp        p11-br-03     |
tsim_l3          p11-br-01     |
l3fmuo_caltrack  p11-br-01    -
l3fcft_vertex    p11-br-02    - Exclude tracks without sufficient stereo

P11.03.00 (03/26/2002)

Status Major change in this pass-release. Backported all packages from test release for L1 and L2. Should allow L2 to run online from this release. COMPLETE change in trigsim functionality here. L1/L2 work fine standalone, L3 works fine standalone....they don't seem to like running together.

P11.01.00

SPECIAL VERSION FOR DATA STUDIES We have made a special L1-only version of d0trigsim based on p11.01 + new version of tsim_l1cal for quick trigger studies on real data, data-MC comparisons, etc. Please grab this script . It should work on either d0mino or clued0. It will copy an executable to your local area along with some customized rcps and allow you to run. Here is how to use it:

setup D0RunII p11.01.00
setup d0cvs
newrel -t p11.01.00 test
cd test 
d0setwa
copy above script to this dir
./run_l1mc.sh
setup d0tools
runD0TrigSim -nocoorsim -localbuild -localrcp -localfwkrcp -filelist=input.dat -rcp=runD0TrigSim_write.rcp
  (where input.dat is a file containing a list of inputfiles)

The output should be a root file and an evpack file. You should be able to run d0_analyze on the evpack file (assuming you can find a good version of d0_analyze...try p10). To run l1cal_analyze on real data you will need to edit tsim_l1l2/rcp/l1cal_analyze.rcp to turn on the "data" switch.

Known Problems/Fixes (p11.01.00)