Constructing default silicon detector from RCP
Constructing default calorimeter geometry
Constructing muon geometry from RCP
MuoBaseGeometry: constructing PDTs  
MuoBaseGeometry: num pdts and types 94 16
MuoBaseGeometry: constructing MDT
MuoBaseGeometry: num mdts and types 48 8
MuoBaseGeometry: constructing WMSCs  
MuoBaseGeometry: num wmscs and types 24 2
MuoBaseGeometry debug out: num_fmsc2
MuoBaseGeometry: constructing FMSCs  
MuoBaseGeometry: num fmscs and types and rings 2 1 12
Default Base Geometry follows:
BaseGeometry at GeometryXform: Offset = (0.000,0.000,0.000), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000))
SiBaseGeometry at GeometryXform: Offset = (0.000,0.000,0.000), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000))
 has 1 centers and 2 ends.
  SiCenter at GeometryXform: Offset = (0.000,0.000,0.000), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 8 centrals
  SiCentral at GeometryXform: Offset = (0.000,0.000,-48.088), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 0 barrel and 3 disk
  SiDisk at GeometryXform: Offset = (0.000,0.000,-53.088), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has two SiSubDisks with radii 6.594 located at GeometryXform: Offset = (0.000,0.000,0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) and GeometryXform: Offset = (0.000,0.000,-0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) with a total of 12 wedge holders:
    No. 1 SiWedgeHolder at GeometryXform: Offset = (6.369,1.707,-52.873), Rotation: ((0.259,0.966,0.000),(-0.966,0.259,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.369,1.707,-52.873), Rotation: ((0.259,0.966,0.000),(-0.966,0.259,0.000),(0.000,0.000,1.000))

    No. 2 SiWedgeHolder at GeometryXform: Offset = (4.663,4.663,-53.303), Rotation: ((-0.707,0.707,0.000),(0.707,0.707,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (4.663,4.663,-53.303), Rotation: ((-0.707,0.707,0.000),(0.707,0.707,0.000),(0.000,0.000,-1.000))

    No. 3 SiWedgeHolder at GeometryXform: Offset = (1.707,6.369,-52.873), Rotation: ((0.966,0.259,0.000),(-0.259,0.966,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (1.707,6.369,-52.873), Rotation: ((0.966,0.259,0.000),(-0.259,0.966,0.000),(0.000,0.000,1.000))

    No. 4 SiWedgeHolder at GeometryXform: Offset = (-1.707,6.369,-53.303), Rotation: ((-0.966,-0.259,0.000),(-0.259,0.966,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-1.707,6.369,-53.303), Rotation: ((-0.966,-0.259,0.000),(-0.259,0.966,0.000),(0.000,0.000,-1.000))

    No. 5 SiWedgeHolder at GeometryXform: Offset = (-4.663,4.663,-52.873), Rotation: ((0.707,-0.707,0.000),(0.707,0.707,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-4.663,4.663,-52.873), Rotation: ((0.707,-0.707,0.000),(0.707,0.707,0.000),(0.000,0.000,1.000))

    No. 6 SiWedgeHolder at GeometryXform: Offset = (-6.369,1.707,-53.303), Rotation: ((-0.259,-0.966,0.000),(-0.966,0.259,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.369,1.707,-53.303), Rotation: ((-0.259,-0.966,0.000),(-0.966,0.259,0.000),(0.000,0.000,-1.000))

    No. 7 SiWedgeHolder at GeometryXform: Offset = (-6.369,-1.707,-52.873), Rotation: ((-0.259,-0.966,0.000),(0.966,-0.259,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.369,-1.707,-52.873), Rotation: ((-0.259,-0.966,0.000),(0.966,-0.259,0.000),(0.000,0.000,1.000))

    No. 8 SiWedgeHolder at GeometryXform: Offset = (-4.663,-4.663,-53.303), Rotation: ((0.707,-0.707,0.000),(-0.707,-0.707,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-4.663,-4.663,-53.303), Rotation: ((0.707,-0.707,0.000),(-0.707,-0.707,0.000),(0.000,0.000,-1.000))

    No. 9 SiWedgeHolder at GeometryXform: Offset = (-1.707,-6.369,-52.873), Rotation: ((-0.966,-0.259,0.000),(0.259,-0.966,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-1.707,-6.369,-52.873), Rotation: ((-0.966,-0.259,0.000),(0.259,-0.966,0.000),(0.000,0.000,1.000))

    No. 10 SiWedgeHolder at GeometryXform: Offset = (1.707,-6.369,-53.303), Rotation: ((0.966,0.259,0.000),(0.259,-0.966,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (1.707,-6.369,-53.303), Rotation: ((0.966,0.259,0.000),(0.259,-0.966,0.000),(0.000,0.000,-1.000))

    No. 11 SiWedgeHolder at GeometryXform: Offset = (4.663,-4.663,-52.873), Rotation: ((-0.707,0.707,0.000),(-0.707,-0.707,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (4.663,-4.663,-52.873), Rotation: ((-0.707,0.707,0.000),(-0.707,-0.707,0.000),(0.000,0.000,1.000))

    No. 12 SiWedgeHolder at GeometryXform: Offset = (6.369,-1.707,-53.303), Rotation: ((0.259,0.966,0.000),(0.966,-0.259,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.369,-1.707,-53.303), Rotation: ((0.259,0.966,0.000),(0.966,-0.259,0.000),(0.000,0.000,-1.000))

  SiDisk at GeometryXform: Offset = (0.000,0.000,-48.088), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has two SiSubDisks with radii 6.594 located at GeometryXform: Offset = (0.000,0.000,-0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) and GeometryXform: Offset = (0.000,0.000,0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) with a total of 12 wedge holders:
    No. 1 SiWedgeHolder at GeometryXform: Offset = (6.092,2.523,-48.303), Rotation: ((-0.383,0.924,0.000),(0.924,0.383,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.092,2.523,-48.303), Rotation: ((-0.383,0.924,0.000),(0.924,0.383,0.000),(0.000,0.000,-1.000))

    No. 2 SiWedgeHolder at GeometryXform: Offset = (4.014,5.231,-47.873), Rotation: ((0.793,0.609,0.000),(-0.609,0.793,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (4.014,5.231,-47.873), Rotation: ((0.793,0.609,0.000),(-0.609,0.793,0.000),(0.000,0.000,1.000))

    No. 3 SiWedgeHolder at GeometryXform: Offset = (0.861,6.538,-48.303), Rotation: ((-0.991,0.131,0.000),(0.131,0.991,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.861,6.538,-48.303), Rotation: ((-0.991,0.131,0.000),(0.131,0.991,0.000),(0.000,0.000,-1.000))

    No. 4 SiWedgeHolder at GeometryXform: Offset = (-2.523,6.092,-47.873), Rotation: ((0.924,-0.383,0.000),(0.383,0.924,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-2.523,6.092,-47.873), Rotation: ((0.924,-0.383,0.000),(0.383,0.924,0.000),(0.000,0.000,1.000))

    No. 5 SiWedgeHolder at GeometryXform: Offset = (-5.231,4.014,-48.303), Rotation: ((-0.609,-0.793,0.000),(-0.793,0.609,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.231,4.014,-48.303), Rotation: ((-0.609,-0.793,0.000),(-0.793,0.609,0.000),(0.000,0.000,-1.000))

    No. 6 SiWedgeHolder at GeometryXform: Offset = (-6.538,0.861,-47.873), Rotation: ((0.131,-0.991,0.000),(0.991,0.131,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.538,0.861,-47.873), Rotation: ((0.131,-0.991,0.000),(0.991,0.131,0.000),(0.000,0.000,1.000))

    No. 7 SiWedgeHolder at GeometryXform: Offset = (-6.092,-2.523,-48.303), Rotation: ((0.383,-0.924,0.000),(-0.924,-0.383,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.092,-2.523,-48.303), Rotation: ((0.383,-0.924,0.000),(-0.924,-0.383,0.000),(0.000,0.000,-1.000))

    No. 8 SiWedgeHolder at GeometryXform: Offset = (-4.014,-5.231,-47.873), Rotation: ((-0.793,-0.609,0.000),(0.609,-0.793,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-4.014,-5.231,-47.873), Rotation: ((-0.793,-0.609,0.000),(0.609,-0.793,0.000),(0.000,0.000,1.000))

    No. 9 SiWedgeHolder at GeometryXform: Offset = (-0.861,-6.538,-48.303), Rotation: ((0.991,-0.131,0.000),(-0.131,-0.991,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-0.861,-6.538,-48.303), Rotation: ((0.991,-0.131,0.000),(-0.131,-0.991,0.000),(0.000,0.000,-1.000))

    No. 10 SiWedgeHolder at GeometryXform: Offset = (2.523,-6.092,-47.873), Rotation: ((-0.924,0.383,0.000),(-0.383,-0.924,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (2.523,-6.092,-47.873), Rotation: ((-0.924,0.383,0.000),(-0.383,-0.924,0.000),(0.000,0.000,1.000))

    No. 11 SiWedgeHolder at GeometryXform: Offset = (5.231,-4.014,-48.303), Rotation: ((0.609,0.793,0.000),(0.793,-0.609,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.231,-4.014,-48.303), Rotation: ((0.609,0.793,0.000),(0.793,-0.609,0.000),(0.000,0.000,-1.000))

    No. 12 SiWedgeHolder at GeometryXform: Offset = (6.538,-0.861,-47.873), Rotation: ((-0.131,0.991,0.000),(-0.991,-0.131,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.538,-0.861,-47.873), Rotation: ((-0.131,0.991,0.000),(-0.991,-0.131,0.000),(0.000,0.000,1.000))

  SiDisk at GeometryXform: Offset = (0.000,0.000,-43.088), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has two SiSubDisks with radii 6.594 located at GeometryXform: Offset = (0.000,0.000,0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) and GeometryXform: Offset = (0.000,0.000,-0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) with a total of 12 wedge holders:
    No. 1 SiWedgeHolder at GeometryXform: Offset = (6.538,0.861,-42.873), Rotation: ((0.131,0.991,0.000),(-0.991,0.131,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.538,0.861,-42.873), Rotation: ((0.131,0.991,0.000),(-0.991,0.131,0.000),(0.000,0.000,1.000))

    No. 2 SiWedgeHolder at GeometryXform: Offset = (5.231,4.014,-43.303), Rotation: ((-0.609,0.793,0.000),(0.793,0.609,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.231,4.014,-43.303), Rotation: ((-0.609,0.793,0.000),(0.793,0.609,0.000),(0.000,0.000,-1.000))

    No. 3 SiWedgeHolder at GeometryXform: Offset = (2.523,6.092,-42.873), Rotation: ((0.924,0.383,0.000),(-0.383,0.924,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (2.523,6.092,-42.873), Rotation: ((0.924,0.383,0.000),(-0.383,0.924,0.000),(0.000,0.000,1.000))

    No. 4 SiWedgeHolder at GeometryXform: Offset = (-0.861,6.538,-43.303), Rotation: ((-0.991,-0.131,0.000),(-0.131,0.991,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-0.861,6.538,-43.303), Rotation: ((-0.991,-0.131,0.000),(-0.131,0.991,0.000),(0.000,0.000,-1.000))

    No. 5 SiWedgeHolder at GeometryXform: Offset = (-4.014,5.231,-42.873), Rotation: ((0.793,-0.609,0.000),(0.609,0.793,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-4.014,5.231,-42.873), Rotation: ((0.793,-0.609,0.000),(0.609,0.793,0.000),(0.000,0.000,1.000))

    No. 6 SiWedgeHolder at GeometryXform: Offset = (-6.092,2.523,-43.303), Rotation: ((-0.383,-0.924,0.000),(-0.924,0.383,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.092,2.523,-43.303), Rotation: ((-0.383,-0.924,0.000),(-0.924,0.383,0.000),(0.000,0.000,-1.000))

    No. 7 SiWedgeHolder at GeometryXform: Offset = (-6.538,-0.861,-42.873), Rotation: ((-0.131,-0.991,0.000),(0.991,-0.131,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.538,-0.861,-42.873), Rotation: ((-0.131,-0.991,0.000),(0.991,-0.131,0.000),(0.000,0.000,1.000))

    No. 8 SiWedgeHolder at GeometryXform: Offset = (-5.231,-4.014,-43.303), Rotation: ((0.609,-0.793,0.000),(-0.793,-0.609,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.231,-4.014,-43.303), Rotation: ((0.609,-0.793,0.000),(-0.793,-0.609,0.000),(0.000,0.000,-1.000))

    No. 9 SiWedgeHolder at GeometryXform: Offset = (-2.523,-6.092,-42.873), Rotation: ((-0.924,-0.383,0.000),(0.383,-0.924,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-2.523,-6.092,-42.873), Rotation: ((-0.924,-0.383,0.000),(0.383,-0.924,0.000),(0.000,0.000,1.000))

    No. 10 SiWedgeHolder at GeometryXform: Offset = (0.861,-6.538,-43.303), Rotation: ((0.991,0.131,0.000),(0.131,-0.991,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.861,-6.538,-43.303), Rotation: ((0.991,0.131,0.000),(0.131,-0.991,0.000),(0.000,0.000,-1.000))

    No. 11 SiWedgeHolder at GeometryXform: Offset = (4.014,-5.231,-42.873), Rotation: ((-0.793,0.609,0.000),(-0.609,-0.793,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (4.014,-5.231,-42.873), Rotation: ((-0.793,0.609,0.000),(-0.609,-0.793,0.000),(0.000,0.000,1.000))

    No. 12 SiWedgeHolder at GeometryXform: Offset = (6.092,-2.523,-43.303), Rotation: ((0.383,0.924,0.000),(0.924,-0.383,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.092,-2.523,-43.303), Rotation: ((0.383,0.924,0.000),(0.924,-0.383,0.000),(0.000,0.000,-1.000))

  SiCentral at GeometryXform: Offset = (0.000,0.000,-31.681), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 1 barrel and 1 disk
  SiBarrel at GeometryXform: Offset = (0.000,0.000,-31.681), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 8 layers
    SiLayer of radius 2.7 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.700,0.000,-31.681), Rotation: ((0.000,0.000,-1.000),(1.000,0.000,0.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (1.350,2.338,-31.681), Rotation: ((-0.866,0.000,-0.500),(0.500,0.000,-0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-1.350,2.338,-31.681), Rotation: ((-0.866,0.000,0.500),(-0.500,0.000,-0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.700,0.000,-31.681), Rotation: ((0.000,0.000,1.000),(-1.000,0.000,0.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-1.350,-2.338,-31.681), Rotation: ((0.866,0.000,0.500),(-0.500,0.000,0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (1.350,-2.338,-31.681), Rotation: ((0.866,0.000,-0.500),(0.500,0.000,0.866),(0.000,-1.000,0.000))
    SiLayer of radius 3.628 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (3.142,1.814,-31.681), Rotation: ((0.500,0.000,0.866),(-0.866,0.000,0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.000,3.628,-31.681), Rotation: ((1.000,0.000,0.000),(0.000,0.000,1.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-3.142,1.814,-31.681), Rotation: ((0.500,0.000,-0.866),(0.866,0.000,0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-3.142,-1.814,-31.681), Rotation: ((-0.500,0.000,-0.866),(0.866,0.000,-0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.000,-3.628,-31.681), Rotation: ((-1.000,0.000,0.000),(0.000,0.000,-1.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (3.142,-1.814,-31.681), Rotation: ((-0.500,0.000,0.866),(-0.866,0.000,-0.500),(0.000,-1.000,0.000))
    SiLayer of radius 4.535 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.927,2.268,-31.681), Rotation: ((0.500,0.000,0.866),(-0.866,0.000,0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (0.000,4.535,-31.681), Rotation: ((1.000,0.000,0.000),(0.000,0.000,1.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.927,2.267,-31.681), Rotation: ((0.500,0.000,-0.866),(0.866,0.000,0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.927,-2.268,-31.681), Rotation: ((-0.500,0.000,-0.866),(0.866,0.000,-0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (0.000,-4.535,-31.681), Rotation: ((-1.000,0.000,0.000),(0.000,0.000,-1.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.927,-2.267,-31.681), Rotation: ((-0.500,0.000,0.866),(-0.866,0.000,-0.500),(0.000,-1.000,0.000))
    SiLayer of radius 5.539 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (5.539,0.000,-31.681), Rotation: ((0.000,0.000,-1.000),(1.000,0.000,0.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (2.769,4.797,-31.681), Rotation: ((-0.866,0.000,-0.500),(0.500,0.000,-0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-2.770,4.797,-31.681), Rotation: ((-0.866,0.000,0.500),(-0.500,0.000,-0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-5.539,0.000,-31.681), Rotation: ((0.000,0.000,1.000),(-1.000,0.000,0.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-2.769,-4.797,-31.681), Rotation: ((0.866,0.000,0.500),(-0.500,0.000,0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (2.770,-4.797,-31.681), Rotation: ((0.866,0.000,-0.500),(0.500,0.000,0.866),(0.000,-1.000,0.000))
    SiLayer of radius 6.753 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.239,2.584,-31.681), Rotation: ((-0.383,0.000,-0.924),(0.924,0.000,-0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (4.111,5.358,-31.681), Rotation: ((-0.793,0.000,-0.609),(0.609,0.000,-0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.881,6.695,-31.681), Rotation: ((-0.991,0.000,-0.131),(0.131,0.000,-0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.584,6.239,-31.681), Rotation: ((-0.924,0.000,0.383),(-0.383,0.000,-0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-5.358,4.111,-31.681), Rotation: ((-0.609,0.000,0.793),(-0.793,0.000,-0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.695,0.881,-31.681), Rotation: ((-0.131,0.000,0.991),(-0.991,0.000,-0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.239,-2.584,-31.681), Rotation: ((0.383,0.000,0.924),(-0.924,0.000,0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-4.111,-5.358,-31.681), Rotation: ((0.793,0.000,0.609),(-0.609,0.000,0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-0.881,-6.695,-31.681), Rotation: ((0.991,0.000,0.131),(-0.131,0.000,0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.584,-6.239,-31.681), Rotation: ((0.924,0.000,-0.383),(0.383,0.000,0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (5.358,-4.111,-31.681), Rotation: ((0.609,0.000,-0.793),(0.793,0.000,0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.695,-0.881,-31.681), Rotation: ((0.131,0.000,-0.991),(0.991,0.000,0.131),(0.000,-1.000,0.000))
    SiLayer of radius 7.567 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (7.502,0.988,-31.681), Rotation: ((0.131,0.000,0.991),(-0.991,0.000,0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.003,4.606,-31.681), Rotation: ((0.609,0.000,0.793),(-0.793,0.000,0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.896,6.991,-31.681), Rotation: ((0.924,0.000,0.383),(-0.383,0.000,0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-0.988,7.502,-31.681), Rotation: ((0.991,0.000,-0.131),(0.131,0.000,0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-4.606,6.003,-31.681), Rotation: ((0.793,0.000,-0.609),(0.609,0.000,0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.991,2.896,-31.681), Rotation: ((0.383,0.000,-0.924),(0.924,0.000,0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-7.502,-0.988,-31.681), Rotation: ((-0.131,0.000,-0.991),(0.991,0.000,-0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.003,-4.607,-31.681), Rotation: ((-0.609,0.000,-0.793),(0.793,0.000,-0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.896,-6.991,-31.681), Rotation: ((-0.924,0.000,-0.383),(0.383,0.000,-0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.988,-7.502,-31.681), Rotation: ((-0.991,0.000,0.131),(-0.131,0.000,-0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (4.607,-6.003,-31.681), Rotation: ((-0.793,0.000,0.609),(-0.609,0.000,-0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.991,-2.896,-31.681), Rotation: ((-0.383,0.000,0.924),(-0.924,0.000,-0.383),(0.000,-1.000,0.000))
    SiLayer of radius 9.086 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.008,1.186,-31.681), Rotation: ((0.131,0.000,0.991),(-0.991,0.000,0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (7.208,5.531,-31.681), Rotation: ((0.609,0.000,0.793),(-0.793,0.000,0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.477,8.394,-31.681), Rotation: ((0.924,0.000,0.383),(-0.383,0.000,0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-1.186,9.008,-31.681), Rotation: ((0.991,0.000,-0.131),(0.131,0.000,0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-5.531,7.208,-31.681), Rotation: ((0.793,0.000,-0.609),(0.609,0.000,0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-8.394,3.477,-31.681), Rotation: ((0.383,0.000,-0.924),(0.924,0.000,0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.008,-1.186,-31.681), Rotation: ((-0.131,0.000,-0.991),(0.991,0.000,-0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-7.208,-5.531,-31.681), Rotation: ((-0.609,0.000,-0.793),(0.793,0.000,-0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.477,-8.394,-31.681), Rotation: ((-0.924,0.000,-0.383),(0.383,0.000,-0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (1.186,-9.008,-31.681), Rotation: ((-0.991,0.000,0.131),(-0.131,0.000,-0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (5.531,-7.208,-31.681), Rotation: ((-0.793,0.000,0.609),(-0.609,0.000,-0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (8.394,-3.477,-31.681), Rotation: ((-0.383,0.000,0.924),(-0.924,0.000,-0.383),(0.000,-1.000,0.000))
    SiLayer of radius 10.036 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.272,3.841,-31.681), Rotation: ((-0.383,0.000,-0.924),(0.924,0.000,-0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (6.110,7.962,-31.681), Rotation: ((-0.793,0.000,-0.609),(0.609,0.000,-0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (1.310,9.950,-31.681), Rotation: ((-0.991,0.000,-0.131),(0.131,0.000,-0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.841,9.272,-31.681), Rotation: ((-0.924,0.000,0.383),(-0.383,0.000,-0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-7.962,6.110,-31.681), Rotation: ((-0.609,0.000,0.793),(-0.793,0.000,-0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.950,1.310,-31.681), Rotation: ((-0.131,0.000,0.991),(-0.991,0.000,-0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.272,-3.841,-31.681), Rotation: ((0.383,0.000,0.924),(-0.924,0.000,0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-6.110,-7.962,-31.681), Rotation: ((0.793,0.000,0.609),(-0.609,0.000,0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-1.310,-9.950,-31.681), Rotation: ((0.991,0.000,0.131),(-0.131,0.000,0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.841,-9.272,-31.681), Rotation: ((0.924,0.000,-0.383),(0.383,0.000,0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (7.962,-6.110,-31.681), Rotation: ((0.609,0.000,-0.793),(0.793,0.000,0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.950,-1.310,-31.681), Rotation: ((0.131,0.000,-0.991),(0.991,0.000,0.131),(0.000,-1.000,0.000))
  SiDisk at GeometryXform: Offset = (0.000,0.000,-38.088), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has two SiSubDisks with radii 6.594 located at GeometryXform: Offset = (0.000,0.000,0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) and GeometryXform: Offset = (0.000,0.000,-0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) with a total of 12 wedge holders:
    No. 1 SiWedgeHolder at GeometryXform: Offset = (6.594,0.000,-37.873), Rotation: ((0.000,1.000,0.000),(-1.000,0.000,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.594,0.000,-37.873), Rotation: ((0.000,1.000,0.000),(-1.000,0.000,0.000),(0.000,0.000,1.000))

    No. 2 SiWedgeHolder at GeometryXform: Offset = (5.711,3.297,-38.303), Rotation: ((-0.500,0.866,0.000),(0.866,0.500,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.711,3.297,-38.303), Rotation: ((-0.500,0.866,0.000),(0.866,0.500,0.000),(0.000,0.000,-1.000))

    No. 3 SiWedgeHolder at GeometryXform: Offset = (3.297,5.711,-37.873), Rotation: ((0.866,0.500,0.000),(-0.500,0.866,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (3.297,5.711,-37.873), Rotation: ((0.866,0.500,0.000),(-0.500,0.866,0.000),(0.000,0.000,1.000))

    No. 4 SiWedgeHolder at GeometryXform: Offset = (0.000,6.594,-38.303), Rotation: ((-1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.000,6.594,-38.303), Rotation: ((-1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,-1.000))

    No. 5 SiWedgeHolder at GeometryXform: Offset = (-3.297,5.711,-37.873), Rotation: ((0.866,-0.500,0.000),(0.500,0.866,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-3.297,5.711,-37.873), Rotation: ((0.866,-0.500,0.000),(0.500,0.866,0.000),(0.000,0.000,1.000))

    No. 6 SiWedgeHolder at GeometryXform: Offset = (-5.711,3.297,-38.303), Rotation: ((-0.500,-0.866,0.000),(-0.866,0.500,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.711,3.297,-38.303), Rotation: ((-0.500,-0.866,0.000),(-0.866,0.500,0.000),(0.000,0.000,-1.000))

    No. 7 SiWedgeHolder at GeometryXform: Offset = (-6.594,0.000,-37.873), Rotation: ((0.000,-1.000,0.000),(1.000,0.000,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.594,0.000,-37.873), Rotation: ((0.000,-1.000,0.000),(1.000,0.000,0.000),(0.000,0.000,1.000))

    No. 8 SiWedgeHolder at GeometryXform: Offset = (-5.711,-3.297,-38.303), Rotation: ((0.500,-0.866,0.000),(-0.866,-0.500,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.711,-3.297,-38.303), Rotation: ((0.500,-0.866,0.000),(-0.866,-0.500,0.000),(0.000,0.000,-1.000))

    No. 9 SiWedgeHolder at GeometryXform: Offset = (-3.297,-5.711,-37.873), Rotation: ((-0.866,-0.500,0.000),(0.500,-0.866,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-3.297,-5.711,-37.873), Rotation: ((-0.866,-0.500,0.000),(0.500,-0.866,0.000),(0.000,0.000,1.000))

    No. 10 SiWedgeHolder at GeometryXform: Offset = (0.000,-6.594,-38.303), Rotation: ((1.000,0.000,0.000),(0.000,-1.000,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.000,-6.594,-38.303), Rotation: ((1.000,0.000,0.000),(0.000,-1.000,0.000),(0.000,0.000,-1.000))

    No. 11 SiWedgeHolder at GeometryXform: Offset = (3.297,-5.711,-37.873), Rotation: ((-0.866,0.500,0.000),(-0.500,-0.866,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (3.297,-5.711,-37.873), Rotation: ((-0.866,0.500,0.000),(-0.500,-0.866,0.000),(0.000,0.000,1.000))

    No. 12 SiWedgeHolder at GeometryXform: Offset = (5.711,-3.297,-38.303), Rotation: ((0.500,0.866,0.000),(0.866,-0.500,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.711,-3.297,-38.303), Rotation: ((0.500,0.866,0.000),(0.866,-0.500,0.000),(0.000,0.000,-1.000))

  SiCentral at GeometryXform: Offset = (0.000,0.000,-18.869), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 1 barrel and 1 disk
  SiBarrel at GeometryXform: Offset = (0.000,0.000,-18.869), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 8 layers
    SiLayer of radius 2.7 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.700,0.000,-18.869), Rotation: ((0.000,0.000,1.000),(-1.000,0.000,0.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (1.350,2.338,-18.869), Rotation: ((0.866,0.000,0.500),(-0.500,0.000,0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-1.350,2.338,-18.869), Rotation: ((0.866,0.000,-0.500),(0.500,0.000,0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.700,0.000,-18.869), Rotation: ((0.000,0.000,-1.000),(1.000,0.000,0.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-1.350,-2.338,-18.869), Rotation: ((-0.866,0.000,-0.500),(0.500,0.000,-0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (1.350,-2.338,-18.869), Rotation: ((-0.866,0.000,0.500),(-0.500,0.000,-0.866),(0.000,-1.000,0.000))
    SiLayer of radius 3.628 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (3.142,1.814,-18.869), Rotation: ((-0.500,0.000,-0.866),(0.866,0.000,-0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.000,3.628,-18.869), Rotation: ((-1.000,0.000,0.000),(0.000,0.000,-1.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-3.142,1.814,-18.869), Rotation: ((-0.500,0.000,0.866),(-0.866,0.000,-0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-3.142,-1.814,-18.869), Rotation: ((0.500,0.000,0.866),(-0.866,0.000,0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.000,-3.628,-18.869), Rotation: ((1.000,0.000,0.000),(0.000,0.000,1.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (3.142,-1.814,-18.869), Rotation: ((0.500,0.000,-0.866),(0.866,0.000,0.500),(0.000,-1.000,0.000))
    SiLayer of radius 4.535 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.927,2.268,-18.869), Rotation: ((0.500,0.000,0.866),(-0.866,0.000,0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (0.000,4.535,-18.869), Rotation: ((1.000,0.000,0.000),(0.000,0.000,1.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.927,2.267,-18.869), Rotation: ((0.500,0.000,-0.866),(0.866,0.000,0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.927,-2.268,-18.869), Rotation: ((-0.500,0.000,-0.866),(0.866,0.000,-0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (0.000,-4.535,-18.869), Rotation: ((-1.000,0.000,0.000),(0.000,0.000,-1.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.927,-2.267,-18.869), Rotation: ((-0.500,0.000,0.866),(-0.866,0.000,-0.500),(0.000,-1.000,0.000))
    SiLayer of radius 5.539 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (5.539,0.000,-18.869), Rotation: ((0.000,0.000,-1.000),(1.000,0.000,0.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (2.769,4.797,-18.869), Rotation: ((-0.866,0.000,-0.500),(0.500,0.000,-0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-2.770,4.797,-18.869), Rotation: ((-0.866,0.000,0.500),(-0.500,0.000,-0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-5.539,0.000,-18.869), Rotation: ((0.000,0.000,1.000),(-1.000,0.000,0.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-2.769,-4.797,-18.869), Rotation: ((0.866,0.000,0.500),(-0.500,0.000,0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (2.770,-4.797,-18.869), Rotation: ((0.866,0.000,-0.500),(0.500,0.000,0.866),(0.000,-1.000,0.000))
    SiLayer of radius 6.753 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.239,2.584,-18.869), Rotation: ((0.383,0.000,0.924),(-0.924,0.000,0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (4.111,5.358,-18.869), Rotation: ((0.793,0.000,0.609),(-0.609,0.000,0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.881,6.695,-18.869), Rotation: ((0.991,0.000,0.131),(-0.131,0.000,0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.584,6.239,-18.869), Rotation: ((0.924,0.000,-0.383),(0.383,0.000,0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-5.358,4.111,-18.869), Rotation: ((0.609,0.000,-0.793),(0.793,0.000,0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.695,0.881,-18.869), Rotation: ((0.131,0.000,-0.991),(0.991,0.000,0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.239,-2.584,-18.869), Rotation: ((-0.383,0.000,-0.924),(0.924,0.000,-0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-4.111,-5.358,-18.869), Rotation: ((-0.793,0.000,-0.609),(0.609,0.000,-0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-0.881,-6.695,-18.869), Rotation: ((-0.991,0.000,-0.131),(0.131,0.000,-0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.584,-6.239,-18.869), Rotation: ((-0.924,0.000,0.383),(-0.383,0.000,-0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (5.358,-4.111,-18.869), Rotation: ((-0.609,0.000,0.793),(-0.793,0.000,-0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.695,-0.881,-18.869), Rotation: ((-0.131,0.000,0.991),(-0.991,0.000,-0.131),(0.000,-1.000,0.000))
    SiLayer of radius 7.567 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (7.502,0.988,-18.869), Rotation: ((-0.131,0.000,-0.991),(0.991,0.000,-0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.003,4.606,-18.869), Rotation: ((-0.609,0.000,-0.793),(0.793,0.000,-0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.896,6.991,-18.869), Rotation: ((-0.924,0.000,-0.383),(0.383,0.000,-0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-0.988,7.502,-18.869), Rotation: ((-0.991,0.000,0.131),(-0.131,0.000,-0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-4.606,6.003,-18.869), Rotation: ((-0.793,0.000,0.609),(-0.609,0.000,-0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.991,2.896,-18.869), Rotation: ((-0.383,0.000,0.924),(-0.924,0.000,-0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-7.502,-0.988,-18.869), Rotation: ((0.131,0.000,0.991),(-0.991,0.000,0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.003,-4.607,-18.869), Rotation: ((0.609,0.000,0.793),(-0.793,0.000,0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.896,-6.991,-18.869), Rotation: ((0.924,0.000,0.383),(-0.383,0.000,0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.988,-7.502,-18.869), Rotation: ((0.991,0.000,-0.131),(0.131,0.000,0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (4.607,-6.003,-18.869), Rotation: ((0.793,0.000,-0.609),(0.609,0.000,0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.991,-2.896,-18.869), Rotation: ((0.383,0.000,-0.924),(0.924,0.000,0.383),(0.000,-1.000,0.000))
    SiLayer of radius 9.086 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.008,1.186,-18.869), Rotation: ((0.131,0.000,0.991),(-0.991,0.000,0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (7.208,5.531,-18.869), Rotation: ((0.609,0.000,0.793),(-0.793,0.000,0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.477,8.394,-18.869), Rotation: ((0.924,0.000,0.383),(-0.383,0.000,0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-1.186,9.008,-18.869), Rotation: ((0.991,0.000,-0.131),(0.131,0.000,0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-5.531,7.208,-18.869), Rotation: ((0.793,0.000,-0.609),(0.609,0.000,0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-8.394,3.477,-18.869), Rotation: ((0.383,0.000,-0.924),(0.924,0.000,0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.008,-1.186,-18.869), Rotation: ((-0.131,0.000,-0.991),(0.991,0.000,-0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-7.208,-5.531,-18.869), Rotation: ((-0.609,0.000,-0.793),(0.793,0.000,-0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.477,-8.394,-18.869), Rotation: ((-0.924,0.000,-0.383),(0.383,0.000,-0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (1.186,-9.008,-18.869), Rotation: ((-0.991,0.000,0.131),(-0.131,0.000,-0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (5.531,-7.208,-18.869), Rotation: ((-0.793,0.000,0.609),(-0.609,0.000,-0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (8.394,-3.477,-18.869), Rotation: ((-0.383,0.000,0.924),(-0.924,0.000,-0.383),(0.000,-1.000,0.000))
    SiLayer of radius 10.036 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.272,3.841,-18.869), Rotation: ((-0.383,0.000,-0.924),(0.924,0.000,-0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (6.110,7.962,-18.869), Rotation: ((-0.793,0.000,-0.609),(0.609,0.000,-0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (1.310,9.950,-18.869), Rotation: ((-0.991,0.000,-0.131),(0.131,0.000,-0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.841,9.272,-18.869), Rotation: ((-0.924,0.000,0.383),(-0.383,0.000,-0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-7.962,6.110,-18.869), Rotation: ((-0.609,0.000,0.793),(-0.793,0.000,-0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.950,1.310,-18.869), Rotation: ((-0.131,0.000,0.991),(-0.991,0.000,-0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.272,-3.841,-18.869), Rotation: ((0.383,0.000,0.924),(-0.924,0.000,0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-6.110,-7.962,-18.869), Rotation: ((0.793,0.000,0.609),(-0.609,0.000,0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-1.310,-9.950,-18.869), Rotation: ((0.991,0.000,0.131),(-0.131,0.000,0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.841,-9.272,-18.869), Rotation: ((0.924,0.000,-0.383),(0.383,0.000,0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (7.962,-6.110,-18.869), Rotation: ((0.609,0.000,-0.793),(0.793,0.000,0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.950,-1.310,-18.869), Rotation: ((0.131,0.000,-0.991),(0.991,0.000,0.131),(0.000,-1.000,0.000))
  SiDisk at GeometryXform: Offset = (0.000,0.000,-25.275), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has two SiSubDisks with radii 6.594 located at GeometryXform: Offset = (0.000,0.000,0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) and GeometryXform: Offset = (0.000,0.000,-0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) with a total of 12 wedge holders:
    No. 1 SiWedgeHolder at GeometryXform: Offset = (6.594,0.000,-25.060), Rotation: ((0.000,1.000,0.000),(-1.000,0.000,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.594,0.000,-25.060), Rotation: ((0.000,1.000,0.000),(-1.000,0.000,0.000),(0.000,0.000,1.000))

    No. 2 SiWedgeHolder at GeometryXform: Offset = (5.711,3.297,-25.490), Rotation: ((-0.500,0.866,0.000),(0.866,0.500,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.711,3.297,-25.490), Rotation: ((-0.500,0.866,0.000),(0.866,0.500,0.000),(0.000,0.000,-1.000))

    No. 3 SiWedgeHolder at GeometryXform: Offset = (3.297,5.711,-25.060), Rotation: ((0.866,0.500,0.000),(-0.500,0.866,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (3.297,5.711,-25.060), Rotation: ((0.866,0.500,0.000),(-0.500,0.866,0.000),(0.000,0.000,1.000))

    No. 4 SiWedgeHolder at GeometryXform: Offset = (0.000,6.594,-25.490), Rotation: ((-1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.000,6.594,-25.490), Rotation: ((-1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,-1.000))

    No. 5 SiWedgeHolder at GeometryXform: Offset = (-3.297,5.711,-25.060), Rotation: ((0.866,-0.500,0.000),(0.500,0.866,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-3.297,5.711,-25.060), Rotation: ((0.866,-0.500,0.000),(0.500,0.866,0.000),(0.000,0.000,1.000))

    No. 6 SiWedgeHolder at GeometryXform: Offset = (-5.711,3.297,-25.490), Rotation: ((-0.500,-0.866,0.000),(-0.866,0.500,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.711,3.297,-25.490), Rotation: ((-0.500,-0.866,0.000),(-0.866,0.500,0.000),(0.000,0.000,-1.000))

    No. 7 SiWedgeHolder at GeometryXform: Offset = (-6.594,0.000,-25.060), Rotation: ((0.000,-1.000,0.000),(1.000,0.000,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.594,0.000,-25.060), Rotation: ((0.000,-1.000,0.000),(1.000,0.000,0.000),(0.000,0.000,1.000))

    No. 8 SiWedgeHolder at GeometryXform: Offset = (-5.711,-3.297,-25.490), Rotation: ((0.500,-0.866,0.000),(-0.866,-0.500,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.711,-3.297,-25.490), Rotation: ((0.500,-0.866,0.000),(-0.866,-0.500,0.000),(0.000,0.000,-1.000))

    No. 9 SiWedgeHolder at GeometryXform: Offset = (-3.297,-5.711,-25.060), Rotation: ((-0.866,-0.500,0.000),(0.500,-0.866,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-3.297,-5.711,-25.060), Rotation: ((-0.866,-0.500,0.000),(0.500,-0.866,0.000),(0.000,0.000,1.000))

    No. 10 SiWedgeHolder at GeometryXform: Offset = (0.000,-6.594,-25.490), Rotation: ((1.000,0.000,0.000),(0.000,-1.000,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.000,-6.594,-25.490), Rotation: ((1.000,0.000,0.000),(0.000,-1.000,0.000),(0.000,0.000,-1.000))

    No. 11 SiWedgeHolder at GeometryXform: Offset = (3.297,-5.711,-25.060), Rotation: ((-0.866,0.500,0.000),(-0.500,-0.866,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (3.297,-5.711,-25.060), Rotation: ((-0.866,0.500,0.000),(-0.500,-0.866,0.000),(0.000,0.000,1.000))

    No. 12 SiWedgeHolder at GeometryXform: Offset = (5.711,-3.297,-25.490), Rotation: ((0.500,0.866,0.000),(0.866,-0.500,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.711,-3.297,-25.490), Rotation: ((0.500,0.866,0.000),(0.866,-0.500,0.000),(0.000,0.000,-1.000))

  SiCentral at GeometryXform: Offset = (0.000,0.000,-6.056), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 1 barrel and 1 disk
  SiBarrel at GeometryXform: Offset = (0.000,0.000,-6.056), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 8 layers
    SiLayer of radius 2.7 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.700,0.000,-6.056), Rotation: ((0.000,0.000,1.000),(-1.000,0.000,0.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (1.350,2.338,-6.056), Rotation: ((0.866,0.000,0.500),(-0.500,0.000,0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-1.350,2.338,-6.056), Rotation: ((0.866,0.000,-0.500),(0.500,0.000,0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.700,0.000,-6.056), Rotation: ((0.000,0.000,-1.000),(1.000,0.000,0.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-1.350,-2.338,-6.056), Rotation: ((-0.866,0.000,-0.500),(0.500,0.000,-0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (1.350,-2.338,-6.056), Rotation: ((-0.866,0.000,0.500),(-0.500,0.000,-0.866),(0.000,-1.000,0.000))
    SiLayer of radius 3.628 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (3.142,1.814,-6.056), Rotation: ((-0.500,0.000,-0.866),(0.866,0.000,-0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.000,3.628,-6.056), Rotation: ((-1.000,0.000,0.000),(0.000,0.000,-1.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-3.142,1.814,-6.056), Rotation: ((-0.500,0.000,0.866),(-0.866,0.000,-0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-3.142,-1.814,-6.056), Rotation: ((0.500,0.000,0.866),(-0.866,0.000,0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.000,-3.628,-6.056), Rotation: ((1.000,0.000,0.000),(0.000,0.000,1.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (3.142,-1.814,-6.056), Rotation: ((0.500,0.000,-0.866),(0.866,0.000,0.500),(0.000,-1.000,0.000))
    SiLayer of radius 4.535 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.927,2.268,-6.056), Rotation: ((0.500,0.000,0.866),(-0.866,0.000,0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (0.000,4.535,-6.056), Rotation: ((1.000,0.000,0.000),(0.000,0.000,1.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.927,2.267,-6.056), Rotation: ((0.500,0.000,-0.866),(0.866,0.000,0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.927,-2.268,-6.056), Rotation: ((-0.500,0.000,-0.866),(0.866,0.000,-0.500),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (0.000,-4.535,-6.056), Rotation: ((-1.000,0.000,0.000),(0.000,0.000,-1.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.927,-2.267,-6.056), Rotation: ((-0.500,0.000,0.866),(-0.866,0.000,-0.500),(0.000,-1.000,0.000))
    SiLayer of radius 5.539 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (5.539,0.000,-6.056), Rotation: ((0.000,0.000,-1.000),(1.000,0.000,0.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (2.769,4.797,-6.056), Rotation: ((-0.866,0.000,-0.500),(0.500,0.000,-0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-2.770,4.797,-6.056), Rotation: ((-0.866,0.000,0.500),(-0.500,0.000,-0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-5.539,0.000,-6.056), Rotation: ((0.000,0.000,1.000),(-1.000,0.000,0.000),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-2.769,-4.797,-6.056), Rotation: ((0.866,0.000,0.500),(-0.500,0.000,0.866),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (2.770,-4.797,-6.056), Rotation: ((0.866,0.000,-0.500),(0.500,0.000,0.866),(0.000,-1.000,0.000))
    SiLayer of radius 6.753 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.239,2.584,-6.056), Rotation: ((0.383,0.000,0.924),(-0.924,0.000,0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (4.111,5.358,-6.056), Rotation: ((0.793,0.000,0.609),(-0.609,0.000,0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.881,6.695,-6.056), Rotation: ((0.991,0.000,0.131),(-0.131,0.000,0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.584,6.239,-6.056), Rotation: ((0.924,0.000,-0.383),(0.383,0.000,0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-5.358,4.111,-6.056), Rotation: ((0.609,0.000,-0.793),(0.793,0.000,0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.695,0.881,-6.056), Rotation: ((0.131,0.000,-0.991),(0.991,0.000,0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.239,-2.584,-6.056), Rotation: ((-0.383,0.000,-0.924),(0.924,0.000,-0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-4.111,-5.358,-6.056), Rotation: ((-0.793,0.000,-0.609),(0.609,0.000,-0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-0.881,-6.695,-6.056), Rotation: ((-0.991,0.000,-0.131),(0.131,0.000,-0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.584,-6.239,-6.056), Rotation: ((-0.924,0.000,0.383),(-0.383,0.000,-0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (5.358,-4.111,-6.056), Rotation: ((-0.609,0.000,0.793),(-0.793,0.000,-0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.695,-0.881,-6.056), Rotation: ((-0.131,0.000,0.991),(-0.991,0.000,-0.131),(0.000,-1.000,0.000))
    SiLayer of radius 7.567 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (7.502,0.988,-6.056), Rotation: ((-0.131,0.000,-0.991),(0.991,0.000,-0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.003,4.606,-6.056), Rotation: ((-0.609,0.000,-0.793),(0.793,0.000,-0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.896,6.991,-6.056), Rotation: ((-0.924,0.000,-0.383),(0.383,0.000,-0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-0.988,7.502,-6.056), Rotation: ((-0.991,0.000,0.131),(-0.131,0.000,-0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-4.606,6.003,-6.056), Rotation: ((-0.793,0.000,0.609),(-0.609,0.000,-0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.991,2.896,-6.056), Rotation: ((-0.383,0.000,0.924),(-0.924,0.000,-0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-7.502,-0.988,-6.056), Rotation: ((0.131,0.000,0.991),(-0.991,0.000,0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.003,-4.607,-6.056), Rotation: ((0.609,0.000,0.793),(-0.793,0.000,0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.896,-6.991,-6.056), Rotation: ((0.924,0.000,0.383),(-0.383,0.000,0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.988,-7.502,-6.056), Rotation: ((0.991,0.000,-0.131),(0.131,0.000,0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (4.607,-6.003,-6.056), Rotation: ((0.793,0.000,-0.609),(0.609,0.000,0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.991,-2.896,-6.056), Rotation: ((0.383,0.000,-0.924),(0.924,0.000,0.383),(0.000,-1.000,0.000))
    SiLayer of radius 9.086 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.008,1.186,-6.056), Rotation: ((0.131,0.000,0.991),(-0.991,0.000,0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (7.208,5.531,-6.056), Rotation: ((0.609,0.000,0.793),(-0.793,0.000,0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.477,8.394,-6.056), Rotation: ((0.924,0.000,0.383),(-0.383,0.000,0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-1.186,9.008,-6.056), Rotation: ((0.991,0.000,-0.131),(0.131,0.000,0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-5.531,7.208,-6.056), Rotation: ((0.793,0.000,-0.609),(0.609,0.000,0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-8.394,3.477,-6.056), Rotation: ((0.383,0.000,-0.924),(0.924,0.000,0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.008,-1.186,-6.056), Rotation: ((-0.131,0.000,-0.991),(0.991,0.000,-0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-7.208,-5.531,-6.056), Rotation: ((-0.609,0.000,-0.793),(0.793,0.000,-0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.477,-8.394,-6.056), Rotation: ((-0.924,0.000,-0.383),(0.383,0.000,-0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (1.186,-9.008,-6.056), Rotation: ((-0.991,0.000,0.131),(-0.131,0.000,-0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (5.531,-7.208,-6.056), Rotation: ((-0.793,0.000,0.609),(-0.609,0.000,-0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (8.394,-3.477,-6.056), Rotation: ((-0.383,0.000,0.924),(-0.924,0.000,-0.383),(0.000,-1.000,0.000))
    SiLayer of radius 10.036 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.272,3.841,-6.056), Rotation: ((-0.383,0.000,-0.924),(0.924,0.000,-0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (6.110,7.962,-6.056), Rotation: ((-0.793,0.000,-0.609),(0.609,0.000,-0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (1.310,9.950,-6.056), Rotation: ((-0.991,0.000,-0.131),(0.131,0.000,-0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.841,9.272,-6.056), Rotation: ((-0.924,0.000,0.383),(-0.383,0.000,-0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-7.962,6.110,-6.056), Rotation: ((-0.609,0.000,0.793),(-0.793,0.000,-0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.950,1.310,-6.056), Rotation: ((-0.131,0.000,0.991),(-0.991,0.000,-0.131),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.272,-3.841,-6.056), Rotation: ((0.383,0.000,0.924),(-0.924,0.000,0.383),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-6.110,-7.962,-6.056), Rotation: ((0.793,0.000,0.609),(-0.609,0.000,0.793),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-1.310,-9.950,-6.056), Rotation: ((0.991,0.000,0.131),(-0.131,0.000,0.991),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.841,-9.272,-6.056), Rotation: ((0.924,0.000,-0.383),(0.383,0.000,0.924),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (7.962,-6.110,-6.056), Rotation: ((0.609,0.000,-0.793),(0.793,0.000,0.609),(0.000,-1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.950,-1.310,-6.056), Rotation: ((0.131,0.000,-0.991),(0.991,0.000,0.131),(0.000,-1.000,0.000))
  SiDisk at GeometryXform: Offset = (0.000,0.000,-12.463), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has two SiSubDisks with radii 6.594 located at GeometryXform: Offset = (0.000,0.000,0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) and GeometryXform: Offset = (0.000,0.000,-0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) with a total of 12 wedge holders:
    No. 1 SiWedgeHolder at GeometryXform: Offset = (6.594,0.000,-12.248), Rotation: ((0.000,1.000,0.000),(-1.000,0.000,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.594,0.000,-12.248), Rotation: ((0.000,1.000,0.000),(-1.000,0.000,0.000),(0.000,0.000,1.000))

    No. 2 SiWedgeHolder at GeometryXform: Offset = (5.711,3.297,-12.678), Rotation: ((-0.500,0.866,0.000),(0.866,0.500,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.711,3.297,-12.678), Rotation: ((-0.500,0.866,0.000),(0.866,0.500,0.000),(0.000,0.000,-1.000))

    No. 3 SiWedgeHolder at GeometryXform: Offset = (3.297,5.711,-12.248), Rotation: ((0.866,0.500,0.000),(-0.500,0.866,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (3.297,5.711,-12.248), Rotation: ((0.866,0.500,0.000),(-0.500,0.866,0.000),(0.000,0.000,1.000))

    No. 4 SiWedgeHolder at GeometryXform: Offset = (0.000,6.594,-12.678), Rotation: ((-1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.000,6.594,-12.678), Rotation: ((-1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,-1.000))

    No. 5 SiWedgeHolder at GeometryXform: Offset = (-3.297,5.711,-12.248), Rotation: ((0.866,-0.500,0.000),(0.500,0.866,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-3.297,5.711,-12.248), Rotation: ((0.866,-0.500,0.000),(0.500,0.866,0.000),(0.000,0.000,1.000))

    No. 6 SiWedgeHolder at GeometryXform: Offset = (-5.711,3.297,-12.678), Rotation: ((-0.500,-0.866,0.000),(-0.866,0.500,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.711,3.297,-12.678), Rotation: ((-0.500,-0.866,0.000),(-0.866,0.500,0.000),(0.000,0.000,-1.000))

    No. 7 SiWedgeHolder at GeometryXform: Offset = (-6.594,0.000,-12.248), Rotation: ((0.000,-1.000,0.000),(1.000,0.000,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.594,0.000,-12.248), Rotation: ((0.000,-1.000,0.000),(1.000,0.000,0.000),(0.000,0.000,1.000))

    No. 8 SiWedgeHolder at GeometryXform: Offset = (-5.711,-3.297,-12.678), Rotation: ((0.500,-0.866,0.000),(-0.866,-0.500,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.711,-3.297,-12.678), Rotation: ((0.500,-0.866,0.000),(-0.866,-0.500,0.000),(0.000,0.000,-1.000))

    No. 9 SiWedgeHolder at GeometryXform: Offset = (-3.297,-5.711,-12.248), Rotation: ((-0.866,-0.500,0.000),(0.500,-0.866,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-3.297,-5.711,-12.248), Rotation: ((-0.866,-0.500,0.000),(0.500,-0.866,0.000),(0.000,0.000,1.000))

    No. 10 SiWedgeHolder at GeometryXform: Offset = (0.000,-6.594,-12.678), Rotation: ((1.000,0.000,0.000),(0.000,-1.000,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.000,-6.594,-12.678), Rotation: ((1.000,0.000,0.000),(0.000,-1.000,0.000),(0.000,0.000,-1.000))

    No. 11 SiWedgeHolder at GeometryXform: Offset = (3.297,-5.711,-12.248), Rotation: ((-0.866,0.500,0.000),(-0.500,-0.866,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (3.297,-5.711,-12.248), Rotation: ((-0.866,0.500,0.000),(-0.500,-0.866,0.000),(0.000,0.000,1.000))

    No. 12 SiWedgeHolder at GeometryXform: Offset = (5.711,-3.297,-12.678), Rotation: ((0.500,0.866,0.000),(0.866,-0.500,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.711,-3.297,-12.678), Rotation: ((0.500,0.866,0.000),(0.866,-0.500,0.000),(0.000,0.000,-1.000))

  SiCentral at GeometryXform: Offset = (0.000,0.000,6.056), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 1 barrel and 1 disk
  SiBarrel at GeometryXform: Offset = (0.000,0.000,6.056), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 8 layers
    SiLayer of radius 2.7 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.700,0.000,6.056), Rotation: ((0.000,0.000,1.000),(1.000,0.000,0.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (1.350,2.338,6.056), Rotation: ((-0.866,0.000,0.500),(0.500,0.000,0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-1.350,2.338,6.056), Rotation: ((-0.866,0.000,-0.500),(-0.500,0.000,0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.700,0.000,6.056), Rotation: ((0.000,0.000,-1.000),(-1.000,0.000,0.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-1.350,-2.338,6.056), Rotation: ((0.866,0.000,-0.500),(-0.500,0.000,-0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (1.350,-2.338,6.056), Rotation: ((0.866,0.000,0.500),(0.500,0.000,-0.866),(0.000,1.000,0.000))
    SiLayer of radius 3.628 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (3.142,1.814,6.056), Rotation: ((0.500,0.000,-0.866),(-0.866,0.000,-0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.000,3.628,6.056), Rotation: ((1.000,0.000,0.000),(0.000,0.000,-1.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-3.142,1.814,6.056), Rotation: ((0.500,0.000,0.866),(0.866,0.000,-0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-3.142,-1.814,6.056), Rotation: ((-0.500,0.000,0.866),(0.866,0.000,0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.000,-3.628,6.056), Rotation: ((-1.000,0.000,0.000),(0.000,0.000,1.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (3.142,-1.814,6.056), Rotation: ((-0.500,0.000,-0.866),(-0.866,0.000,0.500),(0.000,1.000,0.000))
    SiLayer of radius 4.535 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.927,2.268,6.056), Rotation: ((-0.500,0.000,0.866),(0.866,0.000,0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (0.000,4.535,6.056), Rotation: ((-1.000,0.000,0.000),(0.000,0.000,1.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.927,2.267,6.056), Rotation: ((-0.500,0.000,-0.866),(-0.866,0.000,0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.927,-2.268,6.056), Rotation: ((0.500,0.000,-0.866),(-0.866,0.000,-0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (0.000,-4.535,6.056), Rotation: ((1.000,0.000,0.000),(0.000,0.000,-1.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.927,-2.267,6.056), Rotation: ((0.500,0.000,0.866),(0.866,0.000,-0.500),(0.000,1.000,0.000))
    SiLayer of radius 5.539 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (5.539,0.000,6.056), Rotation: ((0.000,0.000,-1.000),(-1.000,0.000,0.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (2.769,4.797,6.056), Rotation: ((0.866,0.000,-0.500),(-0.500,0.000,-0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-2.770,4.797,6.056), Rotation: ((0.866,0.000,0.500),(0.500,0.000,-0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-5.539,0.000,6.056), Rotation: ((0.000,0.000,1.000),(1.000,0.000,0.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-2.769,-4.797,6.056), Rotation: ((-0.866,0.000,0.500),(0.500,0.000,0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (2.770,-4.797,6.056), Rotation: ((-0.866,0.000,-0.500),(-0.500,0.000,0.866),(0.000,1.000,0.000))
    SiLayer of radius 6.753 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.695,0.881,6.056), Rotation: ((-0.131,0.000,0.991),(0.991,0.000,0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (5.358,4.111,6.056), Rotation: ((-0.609,0.000,0.793),(0.793,0.000,0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.584,6.239,6.056), Rotation: ((-0.924,0.000,0.383),(0.383,0.000,0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-0.881,6.695,6.056), Rotation: ((-0.991,0.000,-0.131),(-0.131,0.000,0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-4.111,5.358,6.056), Rotation: ((-0.793,0.000,-0.609),(-0.609,0.000,0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.239,2.584,6.056), Rotation: ((-0.383,0.000,-0.924),(-0.924,0.000,0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.695,-0.881,6.056), Rotation: ((0.131,0.000,-0.991),(-0.991,0.000,-0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-5.358,-4.111,6.056), Rotation: ((0.609,0.000,-0.793),(-0.793,0.000,-0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.584,-6.239,6.056), Rotation: ((0.924,0.000,-0.383),(-0.383,0.000,-0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.881,-6.695,6.056), Rotation: ((0.991,0.000,0.131),(0.131,0.000,-0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (4.111,-5.358,6.056), Rotation: ((0.793,0.000,0.609),(0.609,0.000,-0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.239,-2.584,6.056), Rotation: ((0.383,0.000,0.924),(0.924,0.000,-0.383),(0.000,1.000,0.000))
    SiLayer of radius 7.567 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.991,2.896,6.056), Rotation: ((0.383,0.000,-0.924),(-0.924,0.000,-0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (4.606,6.003,6.056), Rotation: ((0.793,0.000,-0.609),(-0.609,0.000,-0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.988,7.502,6.056), Rotation: ((0.991,0.000,-0.131),(-0.131,0.000,-0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.896,6.991,6.056), Rotation: ((0.924,0.000,0.383),(0.383,0.000,-0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.003,4.606,6.056), Rotation: ((0.609,0.000,0.793),(0.793,0.000,-0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-7.502,0.988,6.056), Rotation: ((0.131,0.000,0.991),(0.991,0.000,-0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.991,-2.896,6.056), Rotation: ((-0.383,0.000,0.924),(0.924,0.000,0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-4.606,-6.003,6.056), Rotation: ((-0.793,0.000,0.609),(0.609,0.000,0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-0.988,-7.502,6.056), Rotation: ((-0.991,0.000,0.131),(0.131,0.000,0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.896,-6.991,6.056), Rotation: ((-0.924,0.000,-0.383),(-0.383,0.000,0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.003,-4.606,6.056), Rotation: ((-0.609,0.000,-0.793),(-0.793,0.000,0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (7.502,-0.988,6.056), Rotation: ((-0.131,0.000,-0.991),(-0.991,0.000,0.131),(0.000,1.000,0.000))
    SiLayer of radius 9.086 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (8.394,3.477,6.056), Rotation: ((-0.383,0.000,0.924),(0.924,0.000,0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (5.531,7.208,6.056), Rotation: ((-0.793,0.000,0.609),(0.609,0.000,0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (1.186,9.008,6.056), Rotation: ((-0.991,0.000,0.131),(0.131,0.000,0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.477,8.394,6.056), Rotation: ((-0.924,0.000,-0.383),(-0.383,0.000,0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-7.208,5.531,6.056), Rotation: ((-0.609,0.000,-0.793),(-0.793,0.000,0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.008,1.186,6.056), Rotation: ((-0.131,0.000,-0.991),(-0.991,0.000,0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-8.394,-3.477,6.056), Rotation: ((0.383,0.000,-0.924),(-0.924,0.000,-0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-5.531,-7.208,6.056), Rotation: ((0.793,0.000,-0.609),(-0.609,0.000,-0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-1.186,-9.008,6.056), Rotation: ((0.991,0.000,-0.131),(-0.131,0.000,-0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.477,-8.394,6.056), Rotation: ((0.924,0.000,0.383),(0.383,0.000,-0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (7.208,-5.531,6.056), Rotation: ((0.609,0.000,0.793),(0.793,0.000,-0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.008,-1.186,6.056), Rotation: ((0.131,0.000,0.991),(0.991,0.000,-0.131),(0.000,1.000,0.000))
    SiLayer of radius 10.036 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.950,1.310,6.056), Rotation: ((0.131,0.000,-0.991),(-0.991,0.000,-0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (7.962,6.110,6.056), Rotation: ((0.609,0.000,-0.793),(-0.793,0.000,-0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.841,9.272,6.056), Rotation: ((0.924,0.000,-0.383),(-0.383,0.000,-0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-1.310,9.950,6.056), Rotation: ((0.991,0.000,0.131),(0.131,0.000,-0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-6.110,7.962,6.056), Rotation: ((0.793,0.000,0.609),(0.609,0.000,-0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.272,3.841,6.056), Rotation: ((0.383,0.000,0.924),(0.924,0.000,-0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.950,-1.310,6.056), Rotation: ((-0.131,0.000,0.991),(0.991,0.000,0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-7.962,-6.110,6.056), Rotation: ((-0.609,0.000,0.793),(0.793,0.000,0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.841,-9.272,6.056), Rotation: ((-0.924,0.000,0.383),(0.383,0.000,0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (1.310,-9.950,6.056), Rotation: ((-0.991,0.000,-0.131),(-0.131,0.000,0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (6.110,-7.962,6.056), Rotation: ((-0.793,0.000,-0.609),(-0.609,0.000,0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.272,-3.841,6.056), Rotation: ((-0.383,0.000,-0.924),(-0.924,0.000,0.383),(0.000,1.000,0.000))
  SiDisk at GeometryXform: Offset = (0.000,0.000,12.463), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has two SiSubDisks with radii 6.594 located at GeometryXform: Offset = (0.000,0.000,-0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) and GeometryXform: Offset = (0.000,0.000,0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) with a total of 12 wedge holders:
    No. 1 SiWedgeHolder at GeometryXform: Offset = (6.594,0.000,12.248), Rotation: ((0.000,1.000,0.000),(1.000,0.000,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.594,0.000,12.248), Rotation: ((0.000,1.000,0.000),(1.000,0.000,0.000),(0.000,0.000,-1.000))

    No. 2 SiWedgeHolder at GeometryXform: Offset = (5.711,3.297,12.678), Rotation: ((0.500,0.866,0.000),(-0.866,0.500,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.711,3.297,12.678), Rotation: ((0.500,0.866,0.000),(-0.866,0.500,0.000),(0.000,0.000,1.000))

    No. 3 SiWedgeHolder at GeometryXform: Offset = (3.297,5.711,12.248), Rotation: ((-0.866,0.500,0.000),(0.500,0.866,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (3.297,5.711,12.248), Rotation: ((-0.866,0.500,0.000),(0.500,0.866,0.000),(0.000,0.000,-1.000))

    No. 4 SiWedgeHolder at GeometryXform: Offset = (0.000,6.594,12.678), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.000,6.594,12.678), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000))

    No. 5 SiWedgeHolder at GeometryXform: Offset = (-3.297,5.711,12.248), Rotation: ((-0.866,-0.500,0.000),(-0.500,0.866,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-3.297,5.711,12.248), Rotation: ((-0.866,-0.500,0.000),(-0.500,0.866,0.000),(0.000,0.000,-1.000))

    No. 6 SiWedgeHolder at GeometryXform: Offset = (-5.711,3.297,12.678), Rotation: ((0.500,-0.866,0.000),(0.866,0.500,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.711,3.297,12.678), Rotation: ((0.500,-0.866,0.000),(0.866,0.500,0.000),(0.000,0.000,1.000))

    No. 7 SiWedgeHolder at GeometryXform: Offset = (-6.594,0.000,12.248), Rotation: ((0.000,-1.000,0.000),(-1.000,0.000,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.594,0.000,12.248), Rotation: ((0.000,-1.000,0.000),(-1.000,0.000,0.000),(0.000,0.000,-1.000))

    No. 8 SiWedgeHolder at GeometryXform: Offset = (-5.711,-3.297,12.678), Rotation: ((-0.500,-0.866,0.000),(0.866,-0.500,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.711,-3.297,12.678), Rotation: ((-0.500,-0.866,0.000),(0.866,-0.500,0.000),(0.000,0.000,1.000))

    No. 9 SiWedgeHolder at GeometryXform: Offset = (-3.297,-5.711,12.248), Rotation: ((0.866,-0.500,0.000),(-0.500,-0.866,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-3.297,-5.711,12.248), Rotation: ((0.866,-0.500,0.000),(-0.500,-0.866,0.000),(0.000,0.000,-1.000))

    No. 10 SiWedgeHolder at GeometryXform: Offset = (0.000,-6.594,12.678), Rotation: ((-1.000,0.000,0.000),(0.000,-1.000,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.000,-6.594,12.678), Rotation: ((-1.000,0.000,0.000),(0.000,-1.000,0.000),(0.000,0.000,1.000))

    No. 11 SiWedgeHolder at GeometryXform: Offset = (3.297,-5.711,12.248), Rotation: ((0.866,0.500,0.000),(0.500,-0.866,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (3.297,-5.711,12.248), Rotation: ((0.866,0.500,0.000),(0.500,-0.866,0.000),(0.000,0.000,-1.000))

    No. 12 SiWedgeHolder at GeometryXform: Offset = (5.711,-3.297,12.678), Rotation: ((-0.500,0.866,0.000),(-0.866,-0.500,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.711,-3.297,12.678), Rotation: ((-0.500,0.866,0.000),(-0.866,-0.500,0.000),(0.000,0.000,1.000))

  SiCentral at GeometryXform: Offset = (0.000,0.000,18.869), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 1 barrel and 1 disk
  SiBarrel at GeometryXform: Offset = (0.000,0.000,18.869), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 8 layers
    SiLayer of radius 2.7 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.700,0.000,18.869), Rotation: ((0.000,0.000,1.000),(1.000,0.000,0.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (1.350,2.338,18.869), Rotation: ((-0.866,0.000,0.500),(0.500,0.000,0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-1.350,2.338,18.869), Rotation: ((-0.866,0.000,-0.500),(-0.500,0.000,0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.700,0.000,18.869), Rotation: ((0.000,0.000,-1.000),(-1.000,0.000,0.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-1.350,-2.338,18.869), Rotation: ((0.866,0.000,-0.500),(-0.500,0.000,-0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (1.350,-2.338,18.869), Rotation: ((0.866,0.000,0.500),(0.500,0.000,-0.866),(0.000,1.000,0.000))
    SiLayer of radius 3.628 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (3.142,1.814,18.869), Rotation: ((0.500,0.000,-0.866),(-0.866,0.000,-0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.000,3.628,18.869), Rotation: ((1.000,0.000,0.000),(0.000,0.000,-1.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-3.142,1.814,18.869), Rotation: ((0.500,0.000,0.866),(0.866,0.000,-0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-3.142,-1.814,18.869), Rotation: ((-0.500,0.000,0.866),(0.866,0.000,0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.000,-3.628,18.869), Rotation: ((-1.000,0.000,0.000),(0.000,0.000,1.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (3.142,-1.814,18.869), Rotation: ((-0.500,0.000,-0.866),(-0.866,0.000,0.500),(0.000,1.000,0.000))
    SiLayer of radius 4.535 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.927,2.268,18.869), Rotation: ((-0.500,0.000,0.866),(0.866,0.000,0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (0.000,4.535,18.869), Rotation: ((-1.000,0.000,0.000),(0.000,0.000,1.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.927,2.267,18.869), Rotation: ((-0.500,0.000,-0.866),(-0.866,0.000,0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.927,-2.268,18.869), Rotation: ((0.500,0.000,-0.866),(-0.866,0.000,-0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (0.000,-4.535,18.869), Rotation: ((1.000,0.000,0.000),(0.000,0.000,-1.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.927,-2.267,18.869), Rotation: ((0.500,0.000,0.866),(0.866,0.000,-0.500),(0.000,1.000,0.000))
    SiLayer of radius 5.539 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (5.539,0.000,18.869), Rotation: ((0.000,0.000,-1.000),(-1.000,0.000,0.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (2.769,4.797,18.869), Rotation: ((0.866,0.000,-0.500),(-0.500,0.000,-0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-2.770,4.797,18.869), Rotation: ((0.866,0.000,0.500),(0.500,0.000,-0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-5.539,0.000,18.869), Rotation: ((0.000,0.000,1.000),(1.000,0.000,0.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-2.769,-4.797,18.869), Rotation: ((-0.866,0.000,0.500),(0.500,0.000,0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (2.770,-4.797,18.869), Rotation: ((-0.866,0.000,-0.500),(-0.500,0.000,0.866),(0.000,1.000,0.000))
    SiLayer of radius 6.753 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.695,0.881,18.869), Rotation: ((-0.131,0.000,0.991),(0.991,0.000,0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (5.358,4.111,18.869), Rotation: ((-0.609,0.000,0.793),(0.793,0.000,0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.584,6.239,18.869), Rotation: ((-0.924,0.000,0.383),(0.383,0.000,0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-0.881,6.695,18.869), Rotation: ((-0.991,0.000,-0.131),(-0.131,0.000,0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-4.111,5.358,18.869), Rotation: ((-0.793,0.000,-0.609),(-0.609,0.000,0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.239,2.584,18.869), Rotation: ((-0.383,0.000,-0.924),(-0.924,0.000,0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.695,-0.881,18.869), Rotation: ((0.131,0.000,-0.991),(-0.991,0.000,-0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-5.358,-4.111,18.869), Rotation: ((0.609,0.000,-0.793),(-0.793,0.000,-0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.584,-6.239,18.869), Rotation: ((0.924,0.000,-0.383),(-0.383,0.000,-0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.881,-6.695,18.869), Rotation: ((0.991,0.000,0.131),(0.131,0.000,-0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (4.111,-5.358,18.869), Rotation: ((0.793,0.000,0.609),(0.609,0.000,-0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.239,-2.584,18.869), Rotation: ((0.383,0.000,0.924),(0.924,0.000,-0.383),(0.000,1.000,0.000))
    SiLayer of radius 7.567 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.991,2.896,18.869), Rotation: ((0.383,0.000,-0.924),(-0.924,0.000,-0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (4.606,6.003,18.869), Rotation: ((0.793,0.000,-0.609),(-0.609,0.000,-0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.988,7.502,18.869), Rotation: ((0.991,0.000,-0.131),(-0.131,0.000,-0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.896,6.991,18.869), Rotation: ((0.924,0.000,0.383),(0.383,0.000,-0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.003,4.606,18.869), Rotation: ((0.609,0.000,0.793),(0.793,0.000,-0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-7.502,0.988,18.869), Rotation: ((0.131,0.000,0.991),(0.991,0.000,-0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.991,-2.896,18.869), Rotation: ((-0.383,0.000,0.924),(0.924,0.000,0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-4.606,-6.003,18.869), Rotation: ((-0.793,0.000,0.609),(0.609,0.000,0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-0.988,-7.502,18.869), Rotation: ((-0.991,0.000,0.131),(0.131,0.000,0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.896,-6.991,18.869), Rotation: ((-0.924,0.000,-0.383),(-0.383,0.000,0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.003,-4.606,18.869), Rotation: ((-0.609,0.000,-0.793),(-0.793,0.000,0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (7.502,-0.988,18.869), Rotation: ((-0.131,0.000,-0.991),(-0.991,0.000,0.131),(0.000,1.000,0.000))
    SiLayer of radius 9.086 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (8.394,3.477,18.869), Rotation: ((-0.383,0.000,0.924),(0.924,0.000,0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (5.531,7.208,18.869), Rotation: ((-0.793,0.000,0.609),(0.609,0.000,0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (1.186,9.008,18.869), Rotation: ((-0.991,0.000,0.131),(0.131,0.000,0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.477,8.394,18.869), Rotation: ((-0.924,0.000,-0.383),(-0.383,0.000,0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-7.208,5.531,18.869), Rotation: ((-0.609,0.000,-0.793),(-0.793,0.000,0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.008,1.186,18.869), Rotation: ((-0.131,0.000,-0.991),(-0.991,0.000,0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-8.394,-3.477,18.869), Rotation: ((0.383,0.000,-0.924),(-0.924,0.000,-0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-5.531,-7.208,18.869), Rotation: ((0.793,0.000,-0.609),(-0.609,0.000,-0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-1.186,-9.008,18.869), Rotation: ((0.991,0.000,-0.131),(-0.131,0.000,-0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.477,-8.394,18.869), Rotation: ((0.924,0.000,0.383),(0.383,0.000,-0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (7.208,-5.531,18.869), Rotation: ((0.609,0.000,0.793),(0.793,0.000,-0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.008,-1.186,18.869), Rotation: ((0.131,0.000,0.991),(0.991,0.000,-0.131),(0.000,1.000,0.000))
    SiLayer of radius 10.036 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.950,1.310,18.869), Rotation: ((0.131,0.000,-0.991),(-0.991,0.000,-0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (7.962,6.110,18.869), Rotation: ((0.609,0.000,-0.793),(-0.793,0.000,-0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.841,9.272,18.869), Rotation: ((0.924,0.000,-0.383),(-0.383,0.000,-0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-1.310,9.950,18.869), Rotation: ((0.991,0.000,0.131),(0.131,0.000,-0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-6.110,7.962,18.869), Rotation: ((0.793,0.000,0.609),(0.609,0.000,-0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.272,3.841,18.869), Rotation: ((0.383,0.000,0.924),(0.924,0.000,-0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.950,-1.310,18.869), Rotation: ((-0.131,0.000,0.991),(0.991,0.000,0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-7.962,-6.110,18.869), Rotation: ((-0.609,0.000,0.793),(0.793,0.000,0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.841,-9.272,18.869), Rotation: ((-0.924,0.000,0.383),(0.383,0.000,0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (1.310,-9.950,18.869), Rotation: ((-0.991,0.000,-0.131),(-0.131,0.000,0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (6.110,-7.962,18.869), Rotation: ((-0.793,0.000,-0.609),(-0.609,0.000,0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.272,-3.841,18.869), Rotation: ((-0.383,0.000,-0.924),(-0.924,0.000,0.383),(0.000,1.000,0.000))
  SiDisk at GeometryXform: Offset = (0.000,0.000,25.275), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has two SiSubDisks with radii 6.594 located at GeometryXform: Offset = (0.000,0.000,-0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) and GeometryXform: Offset = (0.000,0.000,0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) with a total of 12 wedge holders:
    No. 1 SiWedgeHolder at GeometryXform: Offset = (6.594,0.000,25.060), Rotation: ((0.000,1.000,0.000),(1.000,0.000,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.594,0.000,25.060), Rotation: ((0.000,1.000,0.000),(1.000,0.000,0.000),(0.000,0.000,-1.000))

    No. 2 SiWedgeHolder at GeometryXform: Offset = (5.711,3.297,25.490), Rotation: ((0.500,0.866,0.000),(-0.866,0.500,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.711,3.297,25.490), Rotation: ((0.500,0.866,0.000),(-0.866,0.500,0.000),(0.000,0.000,1.000))

    No. 3 SiWedgeHolder at GeometryXform: Offset = (3.297,5.711,25.060), Rotation: ((-0.866,0.500,0.000),(0.500,0.866,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (3.297,5.711,25.060), Rotation: ((-0.866,0.500,0.000),(0.500,0.866,0.000),(0.000,0.000,-1.000))

    No. 4 SiWedgeHolder at GeometryXform: Offset = (0.000,6.594,25.490), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.000,6.594,25.490), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000))

    No. 5 SiWedgeHolder at GeometryXform: Offset = (-3.297,5.711,25.060), Rotation: ((-0.866,-0.500,0.000),(-0.500,0.866,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-3.297,5.711,25.060), Rotation: ((-0.866,-0.500,0.000),(-0.500,0.866,0.000),(0.000,0.000,-1.000))

    No. 6 SiWedgeHolder at GeometryXform: Offset = (-5.711,3.297,25.490), Rotation: ((0.500,-0.866,0.000),(0.866,0.500,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.711,3.297,25.490), Rotation: ((0.500,-0.866,0.000),(0.866,0.500,0.000),(0.000,0.000,1.000))

    No. 7 SiWedgeHolder at GeometryXform: Offset = (-6.594,0.000,25.060), Rotation: ((0.000,-1.000,0.000),(-1.000,0.000,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.594,0.000,25.060), Rotation: ((0.000,-1.000,0.000),(-1.000,0.000,0.000),(0.000,0.000,-1.000))

    No. 8 SiWedgeHolder at GeometryXform: Offset = (-5.711,-3.297,25.490), Rotation: ((-0.500,-0.866,0.000),(0.866,-0.500,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.711,-3.297,25.490), Rotation: ((-0.500,-0.866,0.000),(0.866,-0.500,0.000),(0.000,0.000,1.000))

    No. 9 SiWedgeHolder at GeometryXform: Offset = (-3.297,-5.711,25.060), Rotation: ((0.866,-0.500,0.000),(-0.500,-0.866,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-3.297,-5.711,25.060), Rotation: ((0.866,-0.500,0.000),(-0.500,-0.866,0.000),(0.000,0.000,-1.000))

    No. 10 SiWedgeHolder at GeometryXform: Offset = (0.000,-6.594,25.490), Rotation: ((-1.000,0.000,0.000),(0.000,-1.000,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.000,-6.594,25.490), Rotation: ((-1.000,0.000,0.000),(0.000,-1.000,0.000),(0.000,0.000,1.000))

    No. 11 SiWedgeHolder at GeometryXform: Offset = (3.297,-5.711,25.060), Rotation: ((0.866,0.500,0.000),(0.500,-0.866,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (3.297,-5.711,25.060), Rotation: ((0.866,0.500,0.000),(0.500,-0.866,0.000),(0.000,0.000,-1.000))

    No. 12 SiWedgeHolder at GeometryXform: Offset = (5.711,-3.297,25.490), Rotation: ((-0.500,0.866,0.000),(-0.866,-0.500,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.711,-3.297,25.490), Rotation: ((-0.500,0.866,0.000),(-0.866,-0.500,0.000),(0.000,0.000,1.000))

  SiCentral at GeometryXform: Offset = (0.000,0.000,31.681), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 1 barrel and 1 disk
  SiBarrel at GeometryXform: Offset = (0.000,0.000,31.681), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 8 layers
    SiLayer of radius 2.7 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.700,0.000,31.681), Rotation: ((0.000,0.000,-1.000),(-1.000,0.000,0.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (1.350,2.338,31.681), Rotation: ((0.866,0.000,-0.500),(-0.500,0.000,-0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-1.350,2.338,31.681), Rotation: ((0.866,0.000,0.500),(0.500,0.000,-0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.700,0.000,31.681), Rotation: ((0.000,0.000,1.000),(1.000,0.000,0.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-1.350,-2.338,31.681), Rotation: ((-0.866,0.000,0.500),(0.500,0.000,0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (1.350,-2.338,31.681), Rotation: ((-0.866,0.000,-0.500),(-0.500,0.000,0.866),(0.000,1.000,0.000))
    SiLayer of radius 3.628 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (3.142,1.814,31.681), Rotation: ((-0.500,0.000,0.866),(0.866,0.000,0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.000,3.628,31.681), Rotation: ((-1.000,0.000,0.000),(0.000,0.000,1.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-3.142,1.814,31.681), Rotation: ((-0.500,0.000,-0.866),(-0.866,0.000,0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-3.142,-1.814,31.681), Rotation: ((0.500,0.000,-0.866),(-0.866,0.000,-0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.000,-3.628,31.681), Rotation: ((1.000,0.000,0.000),(0.000,0.000,-1.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (3.142,-1.814,31.681), Rotation: ((0.500,0.000,0.866),(0.866,0.000,-0.500),(0.000,1.000,0.000))
    SiLayer of radius 4.535 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.927,2.268,31.681), Rotation: ((-0.500,0.000,0.866),(0.866,0.000,0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (0.000,4.535,31.681), Rotation: ((-1.000,0.000,0.000),(0.000,0.000,1.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.927,2.267,31.681), Rotation: ((-0.500,0.000,-0.866),(-0.866,0.000,0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.927,-2.268,31.681), Rotation: ((0.500,0.000,-0.866),(-0.866,0.000,-0.500),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (0.000,-4.535,31.681), Rotation: ((1.000,0.000,0.000),(0.000,0.000,-1.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.927,-2.267,31.681), Rotation: ((0.500,0.000,0.866),(0.866,0.000,-0.500),(0.000,1.000,0.000))
    SiLayer of radius 5.539 has 6 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (5.539,0.000,31.681), Rotation: ((0.000,0.000,-1.000),(-1.000,0.000,0.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (2.769,4.797,31.681), Rotation: ((0.866,0.000,-0.500),(-0.500,0.000,-0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-2.770,4.797,31.681), Rotation: ((0.866,0.000,0.500),(0.500,0.000,-0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-5.539,0.000,31.681), Rotation: ((0.000,0.000,1.000),(1.000,0.000,0.000),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-2.769,-4.797,31.681), Rotation: ((-0.866,0.000,0.500),(0.500,0.000,0.866),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (2.770,-4.797,31.681), Rotation: ((-0.866,0.000,-0.500),(-0.500,0.000,0.866),(0.000,1.000,0.000))
    SiLayer of radius 6.753 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.695,0.881,31.681), Rotation: ((0.131,0.000,-0.991),(-0.991,0.000,-0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (5.358,4.111,31.681), Rotation: ((0.609,0.000,-0.793),(-0.793,0.000,-0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.584,6.239,31.681), Rotation: ((0.924,0.000,-0.383),(-0.383,0.000,-0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-0.881,6.695,31.681), Rotation: ((0.991,0.000,0.131),(0.131,0.000,-0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-4.111,5.358,31.681), Rotation: ((0.793,0.000,0.609),(0.609,0.000,-0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.239,2.584,31.681), Rotation: ((0.383,0.000,0.924),(0.924,0.000,-0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.695,-0.881,31.681), Rotation: ((-0.131,0.000,0.991),(0.991,0.000,0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-5.358,-4.111,31.681), Rotation: ((-0.609,0.000,0.793),(0.793,0.000,0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.584,-6.239,31.681), Rotation: ((-0.924,0.000,0.383),(0.383,0.000,0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.881,-6.695,31.681), Rotation: ((-0.991,0.000,-0.131),(-0.131,0.000,0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (4.111,-5.358,31.681), Rotation: ((-0.793,0.000,-0.609),(-0.609,0.000,0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.239,-2.584,31.681), Rotation: ((-0.383,0.000,-0.924),(-0.924,0.000,0.383),(0.000,1.000,0.000))
    SiLayer of radius 7.567 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.991,2.896,31.681), Rotation: ((-0.383,0.000,0.924),(0.924,0.000,0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (4.606,6.003,31.681), Rotation: ((-0.793,0.000,0.609),(0.609,0.000,0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (0.988,7.502,31.681), Rotation: ((-0.991,0.000,0.131),(0.131,0.000,0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-2.896,6.991,31.681), Rotation: ((-0.924,0.000,-0.383),(-0.383,0.000,0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.003,4.606,31.681), Rotation: ((-0.609,0.000,-0.793),(-0.793,0.000,0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-7.502,0.988,31.681), Rotation: ((-0.131,0.000,-0.991),(-0.991,0.000,0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-6.991,-2.896,31.681), Rotation: ((0.383,0.000,-0.924),(-0.924,0.000,-0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-4.606,-6.003,31.681), Rotation: ((0.793,0.000,-0.609),(-0.609,0.000,-0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (-0.988,-7.502,31.681), Rotation: ((0.991,0.000,-0.131),(-0.131,0.000,-0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (2.896,-6.991,31.681), Rotation: ((0.924,0.000,0.383),(0.383,0.000,-0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (6.003,-4.606,31.681), Rotation: ((0.609,0.000,0.793),(0.793,0.000,-0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.06,6) at GeometryXform: Offset = (7.502,-0.988,31.681), Rotation: ((0.131,0.000,0.991),(0.991,0.000,-0.131),(0.000,1.000,0.000))
    SiLayer of radius 9.086 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (8.394,3.477,31.681), Rotation: ((-0.383,0.000,0.924),(0.924,0.000,0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (5.531,7.208,31.681), Rotation: ((-0.793,0.000,0.609),(0.609,0.000,0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (1.186,9.008,31.681), Rotation: ((-0.991,0.000,0.131),(0.131,0.000,0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.477,8.394,31.681), Rotation: ((-0.924,0.000,-0.383),(-0.383,0.000,0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-7.208,5.531,31.681), Rotation: ((-0.609,0.000,-0.793),(-0.793,0.000,0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.008,1.186,31.681), Rotation: ((-0.131,0.000,-0.991),(-0.991,0.000,0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-8.394,-3.477,31.681), Rotation: ((0.383,0.000,-0.924),(-0.924,0.000,-0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-5.531,-7.208,31.681), Rotation: ((0.793,0.000,-0.609),(-0.609,0.000,-0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-1.186,-9.008,31.681), Rotation: ((0.991,0.000,-0.131),(-0.131,0.000,-0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.477,-8.394,31.681), Rotation: ((0.924,0.000,0.383),(0.383,0.000,-0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (7.208,-5.531,31.681), Rotation: ((0.609,0.000,0.793),(0.793,0.000,-0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.008,-1.186,31.681), Rotation: ((0.131,0.000,0.991),(0.991,0.000,-0.131),(0.000,1.000,0.000))
    SiLayer of radius 10.036 has 12 ladders
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.950,1.310,31.681), Rotation: ((0.131,0.000,-0.991),(-0.991,0.000,-0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (7.962,6.110,31.681), Rotation: ((0.609,0.000,-0.793),(-0.793,0.000,-0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (3.841,9.272,31.681), Rotation: ((0.924,0.000,-0.383),(-0.383,0.000,-0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-1.310,9.950,31.681), Rotation: ((0.991,0.000,0.131),(0.131,0.000,-0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-6.110,7.962,31.681), Rotation: ((0.793,0.000,0.609),(0.609,0.000,-0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.272,3.841,31.681), Rotation: ((0.383,0.000,0.924),(0.924,0.000,-0.383),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-9.950,-1.310,31.681), Rotation: ((-0.131,0.000,0.991),(0.991,0.000,0.131),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-7.962,-6.110,31.681), Rotation: ((-0.609,0.000,0.793),(0.793,0.000,0.609),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (-3.841,-9.272,31.681), Rotation: ((-0.924,0.000,0.383),(0.383,0.000,0.924),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (1.310,-9.950,31.681), Rotation: ((-0.991,0.000,-0.131),(-0.131,0.000,0.991),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (6.110,-7.962,31.681), Rotation: ((-0.793,0.000,-0.609),(-0.609,0.000,0.793),(0.000,1.000,0.000))
    SiLadder: Plane, (xlen/2,ylen/2)=(1.7,6) at GeometryXform: Offset = (9.272,-3.841,31.681), Rotation: ((-0.383,0.000,-0.924),(-0.924,0.000,0.383),(0.000,1.000,0.000))
  SiDisk at GeometryXform: Offset = (0.000,0.000,38.088), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has two SiSubDisks with radii 6.594 located at GeometryXform: Offset = (0.000,0.000,-0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) and GeometryXform: Offset = (0.000,0.000,0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) with a total of 12 wedge holders:
    No. 1 SiWedgeHolder at GeometryXform: Offset = (6.594,0.000,37.873), Rotation: ((0.000,1.000,0.000),(1.000,0.000,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.594,0.000,37.873), Rotation: ((0.000,1.000,0.000),(1.000,0.000,0.000),(0.000,0.000,-1.000))

    No. 2 SiWedgeHolder at GeometryXform: Offset = (5.711,3.297,38.303), Rotation: ((0.500,0.866,0.000),(-0.866,0.500,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.711,3.297,38.303), Rotation: ((0.500,0.866,0.000),(-0.866,0.500,0.000),(0.000,0.000,1.000))

    No. 3 SiWedgeHolder at GeometryXform: Offset = (3.297,5.711,37.873), Rotation: ((-0.866,0.500,0.000),(0.500,0.866,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (3.297,5.711,37.873), Rotation: ((-0.866,0.500,0.000),(0.500,0.866,0.000),(0.000,0.000,-1.000))

    No. 4 SiWedgeHolder at GeometryXform: Offset = (0.000,6.594,38.303), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.000,6.594,38.303), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000))

    No. 5 SiWedgeHolder at GeometryXform: Offset = (-3.297,5.711,37.873), Rotation: ((-0.866,-0.500,0.000),(-0.500,0.866,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-3.297,5.711,37.873), Rotation: ((-0.866,-0.500,0.000),(-0.500,0.866,0.000),(0.000,0.000,-1.000))

    No. 6 SiWedgeHolder at GeometryXform: Offset = (-5.711,3.297,38.303), Rotation: ((0.500,-0.866,0.000),(0.866,0.500,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.711,3.297,38.303), Rotation: ((0.500,-0.866,0.000),(0.866,0.500,0.000),(0.000,0.000,1.000))

    No. 7 SiWedgeHolder at GeometryXform: Offset = (-6.594,0.000,37.873), Rotation: ((0.000,-1.000,0.000),(-1.000,0.000,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.594,0.000,37.873), Rotation: ((0.000,-1.000,0.000),(-1.000,0.000,0.000),(0.000,0.000,-1.000))

    No. 8 SiWedgeHolder at GeometryXform: Offset = (-5.711,-3.297,38.303), Rotation: ((-0.500,-0.866,0.000),(0.866,-0.500,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.711,-3.297,38.303), Rotation: ((-0.500,-0.866,0.000),(0.866,-0.500,0.000),(0.000,0.000,1.000))

    No. 9 SiWedgeHolder at GeometryXform: Offset = (-3.297,-5.711,37.873), Rotation: ((0.866,-0.500,0.000),(-0.500,-0.866,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-3.297,-5.711,37.873), Rotation: ((0.866,-0.500,0.000),(-0.500,-0.866,0.000),(0.000,0.000,-1.000))

    No. 10 SiWedgeHolder at GeometryXform: Offset = (0.000,-6.594,38.303), Rotation: ((-1.000,0.000,0.000),(0.000,-1.000,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.000,-6.594,38.303), Rotation: ((-1.000,0.000,0.000),(0.000,-1.000,0.000),(0.000,0.000,1.000))

    No. 11 SiWedgeHolder at GeometryXform: Offset = (3.297,-5.711,37.873), Rotation: ((0.866,0.500,0.000),(0.500,-0.866,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (3.297,-5.711,37.873), Rotation: ((0.866,0.500,0.000),(0.500,-0.866,0.000),(0.000,0.000,-1.000))

    No. 12 SiWedgeHolder at GeometryXform: Offset = (5.711,-3.297,38.303), Rotation: ((-0.500,0.866,0.000),(-0.866,-0.500,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.711,-3.297,38.303), Rotation: ((-0.500,0.866,0.000),(-0.866,-0.500,0.000),(0.000,0.000,1.000))

  SiCentral at GeometryXform: Offset = (0.000,0.000,48.088), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has 0 barrel and 3 disk
  SiDisk at GeometryXform: Offset = (0.000,0.000,43.088), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has two SiSubDisks with radii 6.594 located at GeometryXform: Offset = (0.000,0.000,0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) and GeometryXform: Offset = (0.000,0.000,-0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) with a total of 12 wedge holders:
    No. 1 SiWedgeHolder at GeometryXform: Offset = (6.538,0.861,43.303), Rotation: ((0.131,0.991,0.000),(-0.991,0.131,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.538,0.861,43.303), Rotation: ((0.131,0.991,0.000),(-0.991,0.131,0.000),(0.000,0.000,1.000))

    No. 2 SiWedgeHolder at GeometryXform: Offset = (5.231,4.014,42.873), Rotation: ((-0.609,0.793,0.000),(0.793,0.609,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (5.231,4.014,42.873), Rotation: ((-0.609,0.793,0.000),(0.793,0.609,0.000),(0.000,0.000,-1.000))

    No. 3 SiWedgeHolder at GeometryXform: Offset = (2.523,6.092,43.303), Rotation: ((0.924,0.383,0.000),(-0.383,0.924,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (2.523,6.092,43.303), Rotation: ((0.924,0.383,0.000),(-0.383,0.924,0.000),(0.000,0.000,1.000))

    No. 4 SiWedgeHolder at GeometryXform: Offset = (-0.861,6.538,42.873), Rotation: ((-0.991,-0.131,0.000),(-0.131,0.991,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-0.861,6.538,42.873), Rotation: ((-0.991,-0.131,0.000),(-0.131,0.991,0.000),(0.000,0.000,-1.000))

    No. 5 SiWedgeHolder at GeometryXform: Offset = (-4.014,5.231,43.303), Rotation: ((0.793,-0.609,0.000),(0.609,0.793,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-4.014,5.231,43.303), Rotation: ((0.793,-0.609,0.000),(0.609,0.793,0.000),(0.000,0.000,1.000))

    No. 6 SiWedgeHolder at GeometryXform: Offset = (-6.092,2.523,42.873), Rotation: ((-0.383,-0.924,0.000),(-0.924,0.383,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.092,2.523,42.873), Rotation: ((-0.383,-0.924,0.000),(-0.924,0.383,0.000),(0.000,0.000,-1.000))

    No. 7 SiWedgeHolder at GeometryXform: Offset = (-6.538,-0.861,43.303), Rotation: ((-0.131,-0.991,0.000),(0.991,-0.131,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-6.538,-0.861,43.303), Rotation: ((-0.131,-0.991,0.000),(0.991,-0.131,0.000),(0.000,0.000,1.000))

    No. 8 SiWedgeHolder at GeometryXform: Offset = (-5.231,-4.014,42.873), Rotation: ((0.609,-0.793,0.000),(-0.793,-0.609,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-5.231,-4.014,42.873), Rotation: ((0.609,-0.793,0.000),(-0.793,-0.609,0.000),(0.000,0.000,-1.000))

    No. 9 SiWedgeHolder at GeometryXform: Offset = (-2.523,-6.092,43.303), Rotation: ((-0.924,-0.383,0.000),(0.383,-0.924,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (-2.523,-6.092,43.303), Rotation: ((-0.924,-0.383,0.000),(0.383,-0.924,0.000),(0.000,0.000,1.000))

    No. 10 SiWedgeHolder at GeometryXform: Offset = (0.861,-6.538,42.873), Rotation: ((0.991,0.131,0.000),(0.131,-0.991,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (0.861,-6.538,42.873), Rotation: ((0.991,0.131,0.000),(0.131,-0.991,0.000),(0.000,0.000,-1.000))

    No. 11 SiWedgeHolder at GeometryXform: Offset = (4.014,-5.231,43.303), Rotation: ((-0.793,0.609,0.000),(-0.609,-0.793,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (4.014,-5.231,43.303), Rotation: ((-0.793,0.609,0.000),(-0.609,-0.793,0.000),(0.000,0.000,1.000))

    No. 12 SiWedgeHolder at GeometryXform: Offset = (6.092,-2.523,42.873), Rotation: ((0.383,0.924,0.000),(0.924,-0.383,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.092,-2.523,42.873), Rotation: ((0.383,0.924,0.000),(0.924,-0.383,0.000),(0.000,0.000,-1.000))

  SiDisk at GeometryXform: Offset = (0.000,0.000,48.088), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) has two SiSubDisks with radii 6.594 located at GeometryXform: Offset = (0.000,0.000,-0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) and GeometryXform: Offset = (0.000,0.000,0.215), Rotation: ((1.000,0.000,0.000),(0.000,1.000,0.000),(0.000,0.000,1.000)) with a total of 12 wedge holders:
    No. 1 SiWedgeHolder at GeometryXform: Offset = (6.092,2.523,47.873), Rotation: ((-0.383,0.924,0.000),(0.924,0.383,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (6.092,2.523,47.873), Rotation: ((-0.383,0.924,0.000),(0.924,0.383,0.000),(0.000,0.000,-1.000))

    No. 2 SiWedgeHolder at GeometryXform: Offset = (4.014,5.231,48.303), Rotation: ((0.793,0.609,0.000),(-0.609,0.793,0.000),(0.000,0.000,1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, outer half width, half height)=(0.754605,2.81232,3.83975) at GeometryXform: Offset = (4.014,5.231,48.303), Rotation: ((0.793,0.609,0.000),(-0.609,0.793,0.000),(0.000,0.000,1.000))

    No. 3 SiWedgeHolder at GeometryXform: Offset = (0.861,6.538,47.873), Rotation: ((-0.991,0.131,0.000),(0.131,0.991,0.000),(0.000,0.000,-1.000)) has 1 wedges. 
    SiWedge: Wedge (inner half width, out