MuonMscCalibrater Servant for top level Calibrator. Allows to refresh calibration parameters when necessary in accordance with run number.
MuonMscCals Defines complete set of calibration constants for the MDT.
MuonMscChns Address of a channel as it is seen by unpacking package.
MuonMscCras Address of each crate as it is seen by unpacking package.
MuonMscGains Gain value and error for particular channel
MuonMscLeds LED value and error for particular channel.
MuonMscPeds Pedestal value and error for particular channel.
MuonMscRecoCalibrater MSC calibrator interface for reco.
MuonMscRunSubsets Subset of calibration parameters used to build MSC calibration. Might cover part or whole detector.
MuonMscSets Subset of calibration parameters used to build MSC calibration. Might cover a part or whole detector.
MuonMscSetSubsetMaps Subset of calibration parameters used to build MSC calibration. Might cover part or the whole detector.
MuonMscSfes Address of a SFE as it is seen by unpacking package.
MuonMscT0Adjs The Channel-wise T0 adjustment accounts for channel to channel differences in the MSC analog front-end electronics.
MuonMscT0Offs The channel-wise T0 offset accounts for the offset between the T0-adjust adjusted times and the beam crossing time.
MuonMscT0OffSets Subset of calibration parameters used to build MSC calibration.

hierarchy of classes

this page has been generated automatically by doc++

Table of contents

Classes