SMT Base Geometry (silicon_geometry/base)

SiBarrel
Barrel section of the SMT
SiBaseGeometry
Define Baseline Geometry
SiCenter
SMT central detector (default: six barrels and F disks) A SiCenter is used to position the central units
SiCentral
SMT central unit
SiWedge
Implement a silicon subdisk
SiDisk
Implement a silicon disk
SiEnd
SMT end unit
SiL0
SMT Layer0 detector (one layer, eight barrels)
SiGeometer
The singleton providing fast access to the silicon geometry
SiGeometerDecoupler
Define a buffer class to decouple the Silicon Geometer from the geometry manager
SiLadder
Define a silicon ladder.
SiLayer
Implement the positioning surfaces for a silicon barrel layer
SiWedgeHolder
Given the different structure of F and H disks, a place holder is created to house the appropriate number of wedges, 1 (double-sided) for F disks and 2 (single-sided, glued back to back on a beryllium support) for H disks
The base component of the silicon_geometry package contains classes used to describe the positioning surfaces for the SMT detector. All other components of the silicon_geometry package use these surfaces as reference positions for their subsequent geometry descriptions. Access to the base geometry should be performed via the Geometer. Correspondingly, access to the full channel information should be done via the ChannelGeometer, described in the following section. Examples of the use of both geometers can be found in the $tests$ directory.

alphabetic index hierarchy of classes

this page has been generated automatically by doc++

(c)opyright by Malte Zöckler, Roland Wunderling
contact: doc++@zib.de