RACK MONITOR CONFIGURATION

9 Rack Monitors are installed in the Tunnel :

4 in the Proton Side (CTL_RM_02-11 to CTL_RM_02-14) ;
5 in the Anit-Proton Side (CTL_RM_02-01 to CTL_RM_02-05).

The configuration of the rack monitors are identical :

P3 as Output : RMI Reset and Amplifier Crate Control ;
P2 and P8 as Ouput for the pot motion ;
P7 as Input : Alarms and status of motors, Smoke Detector Alarm and Emergency Line ;
P10 (pin 1 to 4) : LVDT values.

The variable BMASK represents the switches configuration in front of the Rack Monitor panel. Actually, we have 3 Ouputs and 1 Input so the BMASK value is 0x07.

The Rack Monitors (CTL_RM_02-01 and CTL_RM_02-03) are not yet installed in the tunnel. They're used in the small control room for tests.

Name	Location	Configuration					BMASK
		P3 (Output)	P8 (Output)	P2 (Output)	P7 (Input)	P10 (LVDTs informations)
CTL_RM_02-01	A1	Not used	A1-Up Control	A1-Down Control	Pin 1 to 7 : A1-Down Status	Pin 1 : A1-Up Position	0x07
						Pin 2 : A1-Down Position
					Pin 9 to 15 : A1-Up Status	Pin 3 : A1-Out Position
						Pin 4 : A1-In Position
CTL_RM_02-02	A1	Pin 1 : RMI reset	A1-In Control	A1-Out Control	Pin 1 to 7 : A1-In Status	Not used	0x07
		Pin 5 : Amplifier Crate Control			Pin 9 to 15 : A1-Out Status
					Pin 16 : Smoke Detector Status
CTL_RM_02-03	A2	Not used	A2-Up Control	A2-Down Control	Pin 1 to 7 : A2-Down Status	Pin 1 : A2-Up Position	0x07
						Pin 2 : A2-Down Position
					Pin 9 to 15 : A2-Up Status	Pin 3 : A2-Out Position
						Pin 4 : A2-In Position
CTL_RM_02-04	A2	Pin 1 : RMI Reset	A2-In Control	A2-Out Control	Pin 1 to 7 : A2-In Status	Not used	0x07
		Pin 5 : Amplifier Crate Control			Pin 9 to 15 : A2 -Out Status
					Pin 16 : Smoke Detector Status
CTL_RM_02-05	D1 - D2	Pin 1 : RMI Reset	D2 Control	D1 Control	Pin 1 to 7 : D2 Status	Pin 1 : D1 Position	0x07
		Pin 5 : Amplifier Crate Control			Pin 8 : Emergency Line Status
					Pin 9 to 15 : D1 Status	Pin 2 : D2 Position
					Pin 16 : Smoke Detector Status
CTL_RM_02-11	P1	Not used	P1-Up Control	P1-Down Control	Pin 1 to 7 : P1-Up Status	Pin 1 : P1-Up Position	0x07
						Pin 2 : P1-Down Position
					Pin 9 to 15 : P1-Down Status	Pin 3 : P1-Out Position
						Pin 4 : P1-In Position
CTL_RM _02-12	P1	Pin 1 : RMI Reset	P1-In Control	P1-Out Control	Pin 1 to 7 : P1-In Status	Not Used	0x07
		Pin 5 : Amplifier Crate Control			Pin 9 to 15 : P1-Out Status
					Pin 16 : Smoke Detector Status
CTL_RM_02-13	P2	Not Used	P2-Up Control	P2-Down Control	Pin 1 to 7 : P2-Up Status	Pin 1 : P2-Up Position	0x07
						Pin 2 : P2-Down Position
					Pin 9 to 15 : P2-Down Status	Pin 3 : P2-Out Position
						Pin 4 : P2-In Position
CTL_RM_02-14	P2	Pin 1 : RMI Reset	P2-In Control	P2-Out Control	Pin 1 to 7 : P2-Out Status	Not Used	0x07
		Pin 5 : Amplifier Crate Control			Pin 8 : Emergency Line Status
					Pin 9 to 15 : P2-In Status
					Pin 16 : Smoke Detector Status

CONNECTED & TESTED CONNECTED BUT NOT TESTED NOT CONNECTED