• Operator's Guide: How to read out the system [MS Word]
• D0 Note 3977 describing the system (v. 4.0) [abstract]
• How to login to Hall probe PC remotely [html]  [Star]
• Exit codes of the calibration program (does ADC to Gauss conversion)
• Hall Probe Safety Review [ps]
• Talks
• Logbook

Other information about the system

• Tests of the Hall probe system
• Drawings, photos and other graphics
• Location/Labels of parts
• Miscellaneous items
• Download the calibration software (v7), the read-out software (v3.0), or the driver for the CAN interface card (v1.6). The python script to store data in the online database and mail out errors is stored in d0cvs, package onl_DbApps, subdir SolHall.

Links

• The solenoid webpage
• Homepage NIKHEF @ DØ
• Paul Balm's homepage

• The activity flowchart (Dec 3, 1999)
  PB, Feb-27-2001: All activities on this chart are completed.
• Overview of the system - not very detailed
• Overview of the system with some more detail (especially electronical details)
• Drawing shows pin assignments of CAN bus etc.

• The conditioner, the Hall heads, and a locator strip for in the solenoid
• The conditioner and connected Hall head to be located outside the central region
• The Hall head (current design does not have a Kapton flexprint)
• Drawing of the conditioner housing
• Drawing of a locator strip with clips to hold cables
• The DØ Run II tracker
• Location of equipment (Dec 3, 1999)
  PB 29-Jun-2000: A more accurate, but less self-explanatory, drawing can be found above, under 'labels of parts'.

• Locator strip with heads: Zoomed views of the mounted Hall heads.
• CAN-node: Top view with connectors and view with top cover taken off.
• Conditioner: Top view with connectors and view with top cover taken off.
• CAN-node, fully hooked up: CAN-node, connected to eight conditioners, each conditioner connected to three Hall heads.