DØ Current Daily Run Plan

The Run Plan can be found at http://www-d0.fnal.gov/runcoor/runplans/runplan.html

The Run Plan Standard Instructions can be found at
http://www-d0.fnal.gov/runcoor/runplans/runplan_standard.html

This run plan covers:

From : OWL shift Dec 19, 2001

Through: DAY shift Dec 20, 2001

Toroid: On Reverse

Solenoid: On Reverse

Current Situation and Plans

Store 843 is colliding. Beam studies will be starting during the day shift.

The main task of the shift crew is to collect data in stable runs. Maximum input rate into Level 3 will be dictated by stable running; the Trigger Meisters will help determine this at the beginning of stores. By default, all crates should be included in global runs unless experts have removed them, with the exception of the CFT (see below). Experts should be contacted if there are problems with any of the readout crates.

The FPD plans to move the pots during a store. There is a new plan agreed to by Run Coordinator and the Beams Division (see Standard Run Plan). A FPD shifter will be present for all pot motion. Before any pot motions the MCR and CDF must be informed. In particular, CDF would like to be informed about which pots are being moved.

The major shift tasks are:

• Keep DAQ running collecting colliding beam data and cosmics or beam halo data. Recording must be kept ON for all runs.
• All test runs and trigger configurations must be stopped and freed before starting the global data taking run with colliding beam. CFT special runs may only start after the global run is going.
• Include all front-end and readout crates in the data taking; experts have to be called in the case of problems.
  Detector experts should clearly indicate the status of crates on the white board in the Control Room.
• Conduct Captain and shifters' walkthroughs, fill check lists and report all problems to experts.
• Run all detectors at full voltages (beam conditions permitting).
• Monitor beam losses and silicon radiation doses.
• Help experts with short controlled accesses.
• Run all detector Examines under Detector shifter control. Report any problems to the subdetector coordinators. Until further notice the Global Examine is broken and need not be run.
• Run D0 event display
• When there is no beam, calibration runs should be taken. These runs should be coordinated with the DAQ shifter.
• From now on, the offline farms will process all data in global physics runs, hence captains are no longer responsible for making shiftsets. If there are special runs (cosmics, halo, etc) that needs to be reprocessed on the farms, then the persons requesting the special data collection is required to fill in the shiftset request form and to send mail to d0farms@fnal.gov.
• People have requested that the shift summary report still be mailed to d0shifters, as well as posting on D0news. If many people on d0shifters do not wish to see this, we will set up a separate mailing list.

Any work that will be disruptive to data taking during colliding beam (e.g. DAQ system tests, L3 tests, TFW work, sDAQ etc.) must be approved by the Run Coordinator.

All work in the MCH must be done with the full knowledge and presence of the experts and can only occur during times when there is no colliding beam. No cables, configurations, crates etc should be changed without the experts' explicit approval. Also the shift captain and DAQ shifter must be kept informed of any activity in the MCH (this includes test systems for L2, STT, etc.) and this work needs to be recorded in the electronic logbook, with the names of the people involved.

CFT Operations

During colliding beam:

1. The CFT shifter will communicate with the Captain and DAQ shifter and request whether the CFT crates (0x50,0x51,0x52,0x53) are to be included in the primary global run or not.
2. If desired by the CFT shifter, CFT crate(s) will be excluded from the global run and sDAQ runs with the CFT only may be run independently.
3. If independent CFT pDAQ runs or unsuppressed CFT running in the global runs are requested, the Run Coordinator must approve the run. This does not apply to sDAQ runs.
4. Once debugging work with one or more CFT crates has been completed and the crates are available for more than an hour for regular running, the CFT shifter should inform the Captain and DAQ shifter that the crate(s) are available for global runs. These crates must be run in suppressed mode. The global run should not be stopped just to include these crates, but the next natural, convenient break in the run should be used to include the crates.

Standard Trigger Files

For colliding beam, the default file, which has been tested with colliding beam, is now:

global_CalMuon-3.0.xml

For cosmic ray running there are two files:

cosmics-1.1.xml - does not include the L2 crates

cosmics-1.2.xml - contains the L2 crates in non-readout mode

proton_halo_only-1.2.xml

Planned Special Runs or Activities

See the Special Run Request Binder for details
Special runs need approval by the Run Coordinator, the Trigger Meisters and the Trigger Board chairs. Forms are available in the Special Run Requests binder in the control room.