# This is a prescale file for global_L1CalMuon-1.3.xml
# approximated from the version 1.2 prescales at 4e30
# to give an output rate of about 6Hz 

# Special notes for CAL triggers: 
# 1. Total CAL trigger rates should be about 3Hz;
# 2. Don't prescale CEM(1,15) or CJT(1,40) unless their rate exceed 1Hz (if
#    prescale is required, put a note in the captain's log;
# 3. For other C* triggers, distribute remaining CAL bandwidth equally:
#
#          x = [ 3Hz - rate(CEM15) - rate(CJT40) - rate(2CEM12)] / 7
#

# l1trigger name	prescale	desired rate	fraction of total output
################################################################################

Afastz			700000		# 0.3 Hz	5%
ALiveBX			7000000		# <0.1 Hz	<1%

# total of all CAL triggers 		# 3.0 Hz	45%  
CEM(1,5)		2000		# x
CEM(1,em5eta8phi3)	40		# x
CEM(1,12)		2		# x
CEM(1,15)		1		# up to 1.0 Hz	15%   if prescaled include a note
					#		      in the captain's log

CJT(1,5)		2500		# x
CJT(1,jt10eta8phi3)	2		# x
CJT(1,10)		20		# x
CJT(1,40)		1		# up to 1.0 Hz	15%   if prescaled include a note
					#		      in the captain's log

# total of all MUON triggers		# 3.0 Hz	45%
mu1cmsc_fz		200		# <0.5 Hz
mu1pix_fz		120		# <1.5 Hz

mu1cmsc_j5_fz		1		# <1.0 Hz
mu1cmsc_j10_fz		1		# <1.0 Hz
mu1cmsc_j10m_fz		1		# <1.0 Hz
mu2pix_fz		1		# <1.0 Hz

CEM(2,5)		5		# x
CEM(2,12)		1		# up to 1.0 Hz	15%   if prescaled include a note
					#		      in the captain's log