On Thu, 2 May 2002, Maciej Przybycien wrote: > > Hi, > I have turned SMT Monitoring ON. > When SMT Monitoring is turned on run commands (init,start,stop,..) > are passed from COOR to IOCs in VME crates by SDAQ Supervisor. > The indication that SDAQ Supervisor is working is that 'sdaqdnl' on > COORMON turnes yellow. > > In the case a run is paused and SMT shifter power cycles one of SMT > crates we get 'sdaqdnl time out' on TAKER window as soon as the run is > RESUMED. This is because SDAQ Supervisor doesn't know anything more > about power-cycled crate over the rest of the current run. > In that case PUSH RESUME BUTTON AGAIN and that time no more 'sdaqdnl time > out' will appear. > > Please report any problems caused by SMT Monitoring and reasons it is > switched off to: maciej@fnal.gov > > Thank you, > Maciej ---------------------------------- Date: Thu, 09 May 2002 17:21:00 -0500 (CDT) From: Maciej Przybycien To: d0daqshifters@fnal.gov Subject: SMT monitoring Hi, If you decide to switch SMT monitoring off, please write me an email (maciej@fnal.gov) what was the problem, what did you do and what is the RUN NUMBER. I need that information to trace problems connected with SDAQ Supervisor. Thanks, Maciek