Questions, comments and requests should be sent to the D0 Run Coordinator
Last modified: Fri Feb 28 23:37:09 CST 2003

This page automatically refreshes every 15 minutes.

D0 Run Plan Period

  From:    OWL Friday  February 28, 2003
  Through: OWL Tuesday March    04, 2003
Run Plan Index
  • Current Situation & Plans
  • Magnet Polarities
  • Trigger Configurations & Prescales
  • Beams Division Schedule & Status
    		•
  • Global Monitoring
  • D0 Shift Schedule
  • Run Limits
  • Periods Without Shot Setup or Colliding Beam
    		•
    		Special Notes
  • Shift Captains: Actions in Case of Serious Problems
  • Shifters: Improving Data Taking Efficiency
    • Other Links
  • Archives
  • D0 Run II Operations
  • D0 at Work
  • Shift Captain
  • DAQ Shifters
  • Run Database
  • Luminosity Reports
  • daqAI
  • DZero ACNET
    • D0 Restricted
  • Physics Runs
  • Special Runs
  • Run II Bests
  • Run II Stores
  • Data Taking Downtime
  • Current Events
    • MCR & CDF
  • Accelerator Schedule
  • Beam Status (Ch 13)
  • MCR E-log
  • CDF E-log
    		•
    Control Room Procedures Index
  • BLS Power Supplies
  • Calorimeter for Non-CAL Shifters
  • CFT Inputs to L1 Muon
  • CFT Operations
  • CFT Shifter On-Call
    		•
  • Changing Prescales
  • Controlled Accesses
  • Combined Test Stand Operations
  • FPD Operations
  • FPD Procedures for CAL Shifters
  • D0 High Voltage
    		•
  • L1CTT Operations
  • L1 Muon Trigger
  • Luminosity
  • Magnets
  • Muon Shifter On-Call
  • Power Outage Recovery
  • Resetting Trips Due to Water Drip Detection
    		•
  • SCL Inits
  • SMT Voltage
  • STT Operations
  • TLD Badges
  • Training
    		•
    Reminder - Computing Downtime Tuesday March 4 from 07:00
    • Networks: Brief outage that affects the robots.
    • D0mino: Downtime 8 hours to go to 128 cpus.
      • <
    • Clued0 will go down 08:00-12:00 for reboot and cluster master ldap server move to DAB2.
    • d02ka: fix some hardware problems
    • Users will be unable to get files delivered from d0mino cache while d0mino is down, or from the robots while they are down.
    • Enstore: ADIC (MC and recent tmbs) robot down for several hours to upgrade a PC.
    • Databases: Downtime 8 hours to remove bad MC parameters. Contingent on finishing testing. Will also make some minor schema changes.
    • FARMS: Down to change automount configuration.
    • Tue Mar 4 Owl Shift Captain - Please print the Run Plan because D0mino will be unavailable from 07:00-15:00.
      •

    Current Situation and Plans

    • Please page the Triggermeister about 30 minutes before the first store on Fri Feb 28 - to check rates and optimize prescales on the trigger list 10.30.

    • Stack 'N Store from Fri Feb 28 Owl/Day through Tue Mar 04 Owl.

    • Shot setups will be determined by stack size, usually >120 mA and by the Accelerator Operations status.

    • BEFORE any intentional change(s) to the status of the toroid and/or solenoid - ramped up, down, polarity change - the Silicon should be completely powered down, both the high and low voltage.

    • The Shift Captain should call the MCR at the beginning of each shift and as needed to keep up with dynamic schedule of the Tevatron. The MCR may give D0 quiet time or a Controlled Access (CA). Page Dmitri Denisov for CA approval. See the whiteboard for CA requests.

      • Read the D0 Logbook before your shift in order to be better prepared!

    Magnet Polarities

    (from Tuesday 08:00 February 25) 

       Solenoid = Forward
   Toroid   = Forward

    (from Tuesday 08:00 March 04) 

       Solenoid = Forward
   Toroid   = Reverse

    For more details click on Magnet Operations

    Trigger Configurations

    global_CMT-10.30.xml
    • Rules for Changing Prescales - choose the prescale set which has a name closest to the Luminosity at the start of the run.
    • Available prescale sets for the above trigger are:  05E30, 10E30, 15E30, 20E30, 25E30, 30E30, 35E30, 40E30, 45E30 and 50E30. If help is needed with additional prescales, contact the Triggermeisters.
    • In this configuration, we see L1/L2/L3 rates of 500-1100/250-600/30-60 Hz, which is primarily a function of the instantaneous luminosity. If the rates are too high - L1>1200 or L2>700 - contact the Triggermeister. A good effort should be made to keep the average global FEB rate below 5%.

    The D0 Shift Schedule

    • D0 Shift Calendar
    • All Captain and DAQ shifts are 24/7.
    • Shifters can be on-call:
      1. if there is no Store,
      2. if MCR states there is no shot setup expected for 4 or more hours,
      3. if the situation with the sub-detector is stable,
      4. if there are no sub-detector tasks to perform (checklist, calibration, special runs, monitoring), and
      5. if the Shift Captain is in agreement
        6.
    • Calorimeter and Muon Shifters do not need confirmation from their sub-detector coordinators. However, there are Special Instructions which Muon Shifters must follow before leaving.
    • For the SMT & CFT/PS/FPS sub-detectors, the Shift Captain will need approval from their sub-detector coordinators (Eric/Breese or George respectively) before releasing the shifters:
    • Shifters must report in with the Shift Captain to give a contact number before leaving.

    Recorded Physics Run Limit

    • 4 hours

      •     or
    • Inst. Rate
      in Taker < 25 Hz
      •

    Global Monitoring: Trigger & Physics Examines

    • Main Global Monitoring page.
    • Global Monitoring (GM) is being coordinated by Pushpa Bhat. The GM console, d0ol33, is reserved for the GM shifter during scheduled shifts when there is beam. Useful information, numbers and plots should be inserted into the electronic logbook under the GM tab.
    • The name of an institution will be listed next to the GM shifter when the Global Monitoring shift is being run remotely. There is a GM Web Communicator GUI to be used by the Shift Captain, remote GM Shifter, and other shifters as needed. The interface is very simple; shifters communicate via typed text. The gui should be open by default on the Captain console. If not, the gui can be launched with the following command sequence: setup d0online; start_daq gmwebcom.
    • Online Data Monitoring - Current status of Online Monitoring and Examine instructions.
    • The Shift Captain should continue to run the vertex examine (currently on d0ol27). Michiel Sanders has documented the Vertex Examine Instructions in PDF and HTML. For reference, look at the VE plots entered in the logbook during previous shifts.

    Periods Without a Shot Setup or Colliding Beams

    • During non-colliding beam, the  zero_bias_3L1L2L3_1out-1.00.xml  trigger should be run with all available crates to exercise the DAQ as long as this does not conflict with commissioning or calibration efforts. By default, 'Recording' should be ON as we would like to monitor the full data path from the detectors to tape at the Feynman Computing Center. There are three trigger bits with prescales which have been tuned both to exercise the L1, L2 and L3 rates and to send an average of 1 Hz to tape. The prescales should only be changed by or with approval of the triggermeisters.