Pictures of TPP Mounting Frame with 1 Comb and 1 Partially stuffed TPP

Right Side View; note the left side of the TPP is partially stuffed.

Front View, as will be seen at front of PW08 rack

Another Front View; note comb/TPP is in middle of 5 slots

Left Side View; note a few cables in the comb.

Back View, as will be seen from back of PW08 rack; note 2 power terminals on to and closest side of TPP (this may be used to bias the diode).

Closeup of Left Side View; note the cable in the comb, the 4 bulkhead connectors, and the components stuffed in the TPP. This is 1 flex cable's (64 channels) worth of components; each TPP has 8 flex cables, and 32 flat coax ribbon cables.

Not a good picture, but this is a closeup of the gap between the TPP and the back leg of the comb. The two panhead screws indicate where to look for the TPP. We already have a spacer in place to fill this gap; the remaining combs will have this leg longer by 0.3".

Pierrick Hanlet

Last modified: Wed Jan 9 00:16:38 CST 2002