Trigger Log for 630 GeV Running

Begin:12/6/95                                  Last Update: 12/15/95 Bob Hirosky

                              Historical notes
12/13/95
        We started the 630 running w/ L2 hitfinding turned on, but the 
    raw CDD1_CDD2_CDD3 banks were (inadvertantly) not being dropped.
    This was not immediately corrected, since problems were noticed
    in the tracks reconstructed off line.  After studying the problem
    and finding it to be unrelated to hitfinding, the CD group has 
    determined that we can safely drop the raw banks and use the 
    L2 hitfinding as it was intended to be used.

*************************************
12/6/95
TrigList V100
Starting Run#: 94874
Changes: None - this is starting list
TrigParse: L100.GLB-TRIGLIST
Hit Finding: ON
Banks Dropped : NONE
*************************************
12/6/95
TrigList V100
Starting Run#: 94876
Changes: -Add CDC readout to all triggers
         -Add em1_eistrkcc_ms-lnr,em2_eis2_hi-lnr filts
         -drop minbias_cal-lnr
TrigParse: L100A.GLB-TRIGLIST
Hit Finding: ON
Banks Dropped : NONE
*************************************
12/7/95
TrigList V200
Starting Run#: 94916
Changes: -Add Qmp filts to jet_30, jet_12
         -Add jet_lt06-lnr for more mark and pass
         -Add jet_6-lnr,jet_gap_mid-lnr trig/filt
TrigParse: L200.GLB-TRIGLIST
Hit Finding: ON
Banks Dropped : NONE
*************************************
12/8/95
TrigList V300
Starting Run#: 94951
Changes: -Drop:
            jet_mid_2-lnr         
            jet_mns_2-lnr         
            jet_pls_2-lnr         
         -Add:
            jet2_2-lnr             
            jet2_mid_2-lnr         
            jet2_mns_2-lnr         
            jet2_pls_2-lnr         
        -Add MUON readout to Cal+CDC readout triggers
TrigParse: L300.GLB-TRIGLIST
Hit Finding: ON
Banks Dropped : NONE
*************************************
12/9/95
TrigList V300
Starting Run#: 94994
Changes: fix mu_1_cent-lnr filter

    filters l2mu (1, 9, 3, mq_best, cal_confirm, l2_scint, mu_lowpt_y1);
                                   goes to:
    filters l2mu (1, 9, 3, mq_best, cal_confirm, l2_scint, mu_track_y1);
TrigParse: L300A.GLB-TRIGLIST
Hit Finding: ON
Banks Dropped : NONE
*************************************
12/13/95
TrigList V300
Starting Run#: 95101
Changes: Start Dropping Raw Banks
TrigParse: L300B.GLB-TRIGLIST
Hit Finding: ON
Banks Dropped : CDD1_CDD2_CDD3
*************************************
12/15/95
TrigList V301
Starting Run#: 95208
Changes: Replace jet_gap_12(h)-lnr,jet_gap_12mi(h)-lnr
         with    jet_gap_10(h)-lnr,jet_gap_10mi(h)-lnr
         Reduce L2 Jet ET Cut on jet_gap_mns(pls)-lnr
            from 12 GeV to 10 GeV
TrigParse: L301.GLB-TRIGLIST
Hit Finding: ON
Banks Dropped : CDD1_CDD2_CDD3
*************************************