Instruction to start SMT monitoring
-
Determine that there is a normal (priliminary data acquisition)
PDAQ
data taking run in progress
-
Ask the daq expert if any doubts
Below you can find detailed instructions, how to run monitoring
for crate 0x61.
You need to have configuration file that describes
what mode
we are running(we need PDAQ mode):
-
open SMT GUI (ssh1 d0ol11.fnal -l d0smt)
-
cd onl_smtnew/util
-
source smt-setup
-
smt_gui.py
-
click 'global parameters' --> 'SDAQ Parameter' --> uncheck
Calibration --> Modify database
-
click on VRBCR_61 button: details (right hand side)
-
click(left mouce button) on VRBCR_61 in just opened widget
-->'write sdaq file'
-
click on 'quit' from main widget
You need to reload online code and start data acquisition.
It will be automated in near future:
-
telnet t-d0-mch2.fnal.gov (ioc/XXX)
-
connect 30
-
<pdaqLoader
-
to start monitoring:
-
dbpf "SMT0_1","init"
-
dbpf "SMT0_1","begin"
You need to open GUI on the to monitor data from
IOC:
-
on the host (must have x window support):
-
setup d0online
-
~maciej/onl_smtcalib/ssdaq/host/bin/ssdaq and a GUI will
be opened
To end data collection:
If you want to monitor data from other SMT crates
please check mapping
(crate name ('SMT0_1') -- IOC port ('30') ) www-d0.fnal.gov/~fox